You cannot search for connections with most wireless routers. You can however connect to a wireless network that you know is there by using it's SSID. To do that you will need to log into your router and configure it to do so. You log into your router by using a web-browser to navigate to it's IP Address. For most routers their default address is either 192.168.1.1 or 192.168.0.1 Once loged in there sould be a help page that can assist you with the rest of the setup.
2006-09-22 04:36:12
·
answer #1
·
answered by Deoji 2
·
0⤊
0⤋
If you want your desktop to hook to the router wirelessly, you will have to put a wireless card into the desktop. But unless you are too far away from the router to use a cable, you probably do not want to hook to your router from a desktop with wireless.
The top speed (which you almost never actually get) with a wireless 810.11g is 54 mps. Most broadband Internet runs at least 100mps, and can be as high as 400mps. So by switching your desktop to wireless you would reduce your Internet connection to less than half its current speed.
So unless there is a real reason to go wireless (your PC is in the next room or something) I would not do it just to be "cool".
2006-09-22 04:31:35
·
answer #2
·
answered by dewcoons 7
·
0⤊
0⤋
You ISP is the internet provider provider , the business enterprise that provides your internet and the PPP is factor to point out Protocol. In networking, the factor-to-factor Protocol, or PPP, is a know-how hyperlink protocol widespread to envision a right away connection between 2 nodes over serial cable, telephone line, trunk line, cellular telephone, superb radio links, or fiber optic links. maximum internet provider companies use PPP for purchasers' dial-up get admission to to the internet. 2 uncomplicated encapsulated varieties of PPP, factor-to-factor Protocol over Ethernet (PPPoE) or factor-to-factor Protocol over ATM (PPPoA), are utilized in a similar function with digital Subscriber Line (DSL) internet provider. PPP is often used to act as a know-how hyperlink layer protocol for connection over synchronous and asynchronous circuits, the place it has generally outmoded the older, non-usual Serial Line internet Protocol (SLIP), and call business enterprise mandated standards (inclusive of hyperlink get admission to Protocol, Balanced (LAPB) interior the X.25 protocol suite). PPP replaced into designed to artwork with multiple community layer protocols, including internet Protocol (IP), Novell's Internetwork Packet replace (IPX), NBF and AppleTalk.
2016-10-17 11:01:29
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
No, the router is sending signals, not receiving them. You would need to buy a card for your pc. Here's a link for that type of hardware: http://www.geeks.com/products.asp?cat=NET This is only capable when you have something that receives signals!
2006-09-22 04:30:21
·
answer #4
·
answered by smartestassofthemall 3
·
0⤊
1⤋
I think you need the wireless card, maybe software can handle that but I doubt it.
2006-09-22 04:28:39
·
answer #5
·
answered by Anonymous
·
0⤊
1⤋
You might want to... But I am not sure... Hell, I can't even get my computer to recognize when it has Cable internet...
2006-09-22 04:27:26
·
answer #6
·
answered by Shadow 3
·
0⤊
1⤋
It works like any other wireless card.
so yes
2006-09-22 04:28:03
·
answer #7
·
answered by cjrrock 3
·
0⤊
2⤋