Please tell me how can we stop that overflow automatically.
Auto swich or any other machiner. How much have to spend on that. what is warrenty or guarenty for that. How can I get that. phone nos. address or any how.
2006-09-21 21:45:51 · 6 answers · asked by Anonymous in Local Businesses ➔ India ➔ Mumbai
Hello "K",
Do not forget the most simple overflow valve available in the world!
It is in your TOILET!
I can not think of a more effective and inexpensive overflow valve available in the world today. Just copy its design!
James
2006-09-22 01:08:25 · answer #1 · answered by jpr_sd 4 · 0⤊ 0⤋
There are mechanical float switches which are simple in operation and easy to install.
Normally they have a ampre rating of 15amps.
They have 3 leads on the wire. One is the connected to your phase line, the other two are for connection to the phase line of your pump, depending on the operation you need.If a float switch is installed in an underground sump, you need the pump to shut off when the water level is low.So one of the two wires is for this ie shut off when the float goes down.
In an overhead tan its the opposite ie the pump should shut down when the water level has reached the maximum set level.The remaining wire is for this.
There is also a counterweight which can be adjusted so that you can adjust the activation of the switch at a particular level.
Dont worry normally the switch comes with a full set of instructions.
Even if your pump is a small one it is adviseable to do the switching to the pump from the float switch through a solenoid.This will give the float switch longer life.
If you have a three phase pump you will definitely need a solenoid.
Float switches are imported and should be available in reputed electrical shops in metros.
There are even Indian made ones now, which are cheaper.But I dont know how long they will last.
Hope this was helpful to your question.
2006-09-22 09:45:03 · answer #2 · answered by joe m 2 · 0⤊ 0⤋
It is call flow con troll, float valve it is in your toilet tank, but they make bigger valves for bigger jobs, try local plumbing supply or plumbing contractors.
Internet will have it also.
Call the builder or architect.
There are all kinds of these valves they can shut of the pump also or if it is city pressure type filling it will be just like toilet tank.
2006-09-22 12:32:11 · answer #3 · answered by minootoo 7 · 0⤊ 0⤋
need way more info . ate they pressurized . where are they at in the bulding . how do they get the water . where are the bulding at . what kind of system is it . are you in the city . how much overflow .
2006-09-22 04:53:06 · answer #4 · answered by k dog 4 · 0⤊ 0⤋
SIMPLE OVERFLOW PIPE AT TOP OF TANK CONNECTED TO WASTE WATER PIPE
2006-09-22 04:50:45 · answer #5 · answered by bewdyboris 4 · 0⤊ 0⤋
PUT BALL VALVES IN ALL TANKS. CHEAP & BEST.
2006-09-22 12:18:36 · answer #6 · answered by Anonymous · 0⤊ 0⤋