English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

It has the large red cable from the battery that goes on one of the solenoid post, on the other side it has a large red cable, a small red wire, that I am assuming goes on the opposite post going forward to ignition switch. It also has a yellow wire that goes to the seat safety switch. Does this one go to ground? It has a small black wire that has its own clip and it is obvious where it goes. I need to know where the battery cable goes to start and where to go from there. Any help anyone can give is appreciated! Thanks

2006-09-21 16:42:29 · 7 answers · asked by Anonymous in Home & Garden Maintenance & Repairs

7 answers

OK here we go. the only difference from any other car or tractor is the switch under the seat for safety.

there should be a large wire from the battery and this is a switch so the other side is a large wire to the starter.

the 2 smaller wires are for the key..
one is a small one coming from the key this tels the solenoid to close and start the motor.
this wont work unless you are siting in the seat and connecting the other small wire to ground.

2006-09-21 17:32:23 · answer #1 · answered by Scott A 1 · 0 0

Solenoid Wiring Diagram

2016-09-28 21:11:02 · answer #2 · answered by pharisien 4 · 0 0

This Site Might Help You.

RE:
I need a wiring diagram for starter solenoid on a Murray 11hp 38 in cut riding lawn mower.?
It has the large red cable from the battery that goes on one of the solenoid post, on the other side it has a large red cable, a small red wire, that I am assuming goes on the opposite post going forward to ignition switch. It also has a yellow wire that goes to the seat safety switch. Does this...

2015-08-06 09:26:20 · answer #3 · answered by Anonymous · 0 0

The two big red wires, one goes to the starter and one to the battery. the black one with its own clip is a ground, that is right down at the base of the solinoid. The small red wire would go to the ignition switch, If it has a yellow wire on the solinoid then that has to be in series with the ignition switch. All it is doing is making sure you can not start it unless you are on the seat.

2006-09-22 01:30:40 · answer #4 · answered by Thomas S 6 · 1 0

For the best answers, search on this site https://shorturl.im/awmoK

Have you looked under the hood or foot rests. Some manufactors put diagrams on the machines. Some have decals on the mower deck for the deck belt.

2016-04-02 02:24:45 · answer #5 · answered by Anonymous · 0 0

--->> Tips---> https://trimurl.im/g47/i-need-a-wiring-diagram-for-starter-solenoid-on-a-murray-11hp-38-in-cut-riding-lawn-mower

2015-08-04 09:06:51 · answer #6 · answered by Anonymous · 0 0

gosh that's something i wouldn't want to answer unless i was completely sure. you should try googling the type of lawnmower (name and model) and look for wiring diagrams from there.

that google is the cat's meow.

2006-09-21 16:44:19 · answer #7 · answered by tami 4 · 0 0

This may help you.....
http://www.tulsaenginewarehouse.com/drawings/allwiring.pdf

2006-09-21 19:49:07 · answer #8 · answered by 572ci. 5 · 0 0

fedest.com, questions and answers