printer fully functional. And working fine. But how do i get carriage to stop in centre of printer so i can install the inks or do i have to go into somrthing on the computer itself to do this. I do not have a manual for the printer as it was not new when i bought it. Can anyone tell me how --please -- thank you eileen
2006-09-21 12:23:54 · 8 answers · asked by eileen l 1 in Computers & Internet ➔ Hardware ➔ Printers
power down the printer pull the carriage across manually fit the carts in and turn it on again, it will recentre automatically
2006-09-21 12:28:04 · answer #1 · answered by cedley1969 4 · 0⤊ 2⤋
you could attempt to save on with those instructions below: a million) turn on the printer; take out the former used cartridges 2) turn off the printer for a couple of minutes 3) turn on the printer, at the same time as it says "insert inks", and then insert the like minded cartridges one by making use of one, making confident the inks are sitting thoroughly interior the slots.
2016-11-23 13:55:00 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Try changing the ink cartridges with the printer turned on, and also try it with the printer turned off.
Micro Center has a free service department with a computer guru technician who can probably help you. You have to go in to ask, as they do not give advice over the phone, at least that has been my experience but you can always try.
2006-09-21 15:14:22 · answer #3 · answered by Sandra P 1 · 0⤊ 0⤋
With the printer on, but not printing, Press the maintenance button for 6 seconds. (it is the button on the left, closest to the paper tray) This will bring the print head to the replacement position. It will stop at the black ink cartrigde first. The black print cartridge is on the left, colour on the right.
Here is the link to the PDF manual you can download:
http://files.support.epson.com/pdf/sc44ux/sc44uxu1.pdf
2006-09-21 14:00:27 · answer #4 · answered by Daremo 3 · 0⤊ 0⤋
Epson printer cartridges does not stop in the center they stop just a few inches from the right corner. You are able to change them from that position.
2006-09-21 15:07:03 · answer #5 · answered by Irie 3 · 0⤊ 0⤋
Open the cover and press the maintenance button for 6 seconds. The print heads will move to the cartridge replacement position.
go to the link and print out the instruction manual for free.
2006-09-21 12:36:56 · answer #6 · answered by heshootshescores3 4 · 0⤊ 0⤋
Go to printer utilities & click change cartridge it then tells you what to do
2006-09-23 12:04:57 · answer #7 · answered by ? 6 · 1⤊ 0⤋
go to printer-help-insert new ink cartrige-read-follow instructions-may require a alingnment.... and there u go. or go to their web site for help. I tore one up not doing that:-)
2006-09-21 12:33:16 · answer #8 · answered by Anonymous · 1⤊ 0⤋