Its an Isuzu
2006-09-21 07:07:25 · 5 answers · asked by Scatman 5 in Cars & Transportation ➔ Maintenance & Repairs
10 yrs old
2006-09-21 07:07:45 · update #1
what will it damage first (or most)
2006-09-21 07:08:57 · update #2
it could last a long time depends on how the motor is worn if it is in good shape inside it can last a long time 6000 RPM is not really high for this motor
2006-09-21 10:12:02 · answer #1 · answered by firefightingexpert 5 · 0⤊ 0⤋
under a load not to many.
That mean if you are just gassing it in park it is less damaging than in gear. but it is not rated to rev that high. It stops creating torque at 4000 rpm. so it does no good to rev higher.....
Rod bearings go first then the rods break and go though the side of the block.....Total LOSS!
2006-09-21 14:12:33 · answer #2 · answered by tommy 4 · 0⤊ 0⤋
until it runs out of gas as long as it is well cooled and lubricated.
2006-09-21 14:15:14 · answer #3 · answered by Anonymous · 0⤊ 0⤋
any time you red line it or above you are asking for problems
2006-09-21 14:16:50 · answer #4 · answered by norsmen 5 · 0⤊ 0⤋
hold it there and then come back and let us know how long it lasted
2006-09-21 16:48:27 · answer #5 · answered by Anonymous · 1⤊ 0⤋