how can i free a stuck slide in a 4stroke carb?

Question

honda 100 dirtbike sat for 2 years and throttle is stuck shut. unscrewed top of carb and slide wont come out. how can i free it? wd-40?

Answer 1

Spray it with a lot of silicone lube (not WD 40 which kills rubber). Then get your fingers it there and wiggle and push until it gives .Try to let the lube do the work, the less force you use, the less likely it is you'll damage something. You will have to open and clean the carb after 2 years of sitting.

Answer 2

permit me ask, you assert you're restoring this bike. you're conscious that it isn't the right carb suited? not something incorrect with the previous around slides they artwork super, that is purely not what got here inventory. it might desire to have a Bendix carb. besides in case you at the instant are not likely to bypass with a one hundred% production facility resto permit me provide you a pair of information. in case you have the greenbacks seem into getting a Mallory Unilite distributor, low ohm coil like a Blue Streak and a Cycle electric powered generator. I run this setup on a fifty 5 Panhead and 40 two Flathead. have faith me this would scientific care ninety% of the matters you have as quickly as the previous lady is up and working. additionally, in case you maintain the roundslide carb, once you're waiting to initiate the bike, set the choke, shop the ignition off and supply it 2 or 3 kicks with the throttle CLOSED then turn on the ignition and kick with the throttle nonetheless CLOSED. in case you crack open the throttle like with maximum carbs you will kick your self to loss of life. The Mikuni desires the vacuum to offer the gas at startup. desire this enables.

Answer 3

Soak the carb in carb cleaner (can get it at any bike or auto parts dealer).
wd-40 won't do anything.

Answer 4

wd-40

Answer 5

Soak in PB Blaster, you can get it at any auto parts store.

Answer 6

peroxide