And screen is unreadable, i have to print answers , i have erased the hard disk and re-installed all factory software , what can i do ?
2006-09-21 03:09:56 · 5 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Laptops & Notebooks
It sounds like a hardware fault rather than a software issue.
I suspect you have a broken connection somewhere. When you move the laptop the connection changes and the PC thinks you've hit the power button.
Also, the ribbon cable going from the base to the screen may be broken, so when its moved it loses connection and you can't read the screen.
If its under warranty, take it back, if not you'll be cheaper buying a new one, so drop it down a flight of stairs and claim on your insurance.
PS - make a backup first!
2006-09-21 03:20:23 · answer #1 · answered by wally_zebon 5 · 0⤊ 0⤋
It sounds like a loose connection from the screen to the graphics card. The cable runs through the hinge and can (it shouldn't) get either warn or the connection loosened.
Like all laptop repairs, unless your feeling very brave, this sound like a job for an engineer.
You could try www.laptopsolutions.co.uk
There are other out there with a no fix no fee system but then I always wonder how much they do charge if they can fix it.
2006-09-21 03:17:17 · answer #2 · answered by David Computer Guy 4 · 0⤊ 0⤋
I ave to agree with david on this one about it could be a loose connection I had the same problem, but If its under warranty take it back to the shop for repair.
2006-09-21 03:19:16 · answer #3 · answered by Tiger 5 · 0⤊ 0⤋
do not do any more thing with yourself as you have very clever hands... take it to the shop to maintain it by specialist
2006-09-21 03:18:55 · answer #4 · answered by a.m 2 · 0⤊ 0⤋
take it to the shop
2006-09-21 03:12:39 · answer #5 · answered by Anonymous · 0⤊ 0⤋