the pin at the end of the cable into motor,how does it stay in?mine pops out
2006-09-20 22:58:13 · 3 answers · asked by Tom H 2 in Cars & Transportation ➔ Motorcycles
You need a new cable. The end at the clutch with the round cable end is worn. If in doubt replace the small arm that the cable attachs to also.
It should not pop out if cable is adjusted correctly, and not worn horribly.
2006-09-21 02:28:38 · answer #1 · answered by emetz700 2 · 0⤊ 1⤋
There is a plate bolted to the case. It prevents the clutch lifter from pulling out of the crankcase.
http://www.mrcycles.com/
crankcase picture - #10
2006-09-21 04:17:30 · answer #2 · answered by guardrailjim 7 · 0⤊ 0⤋
in case you place the hot plastics on the previous bike not purely will you seem diverse, you will appear as if a affordable fool. The motorcycles are very diverse in shape so not something will bolt on. follow the previous bike, you will get greater appreciate for protecting it lively.
2016-12-18 14:11:07 · answer #3 · answered by ? 4 · 0⤊ 0⤋