2006-09-20 16:03:27 · 9 answers · asked by heath s 1 in Cars & Transportation ➔ Maintenance & Repairs
No ... because the front diff and the rear diff rotate in different directions internally. the front gears are called reverse cut because they are lfipped 180 degrees. if they had the same cut as the rear you would get alot of gear noise due to the design.
2006-09-20 16:46:46 · answer #1 · answered by knowsitall1 2 · 0⤊ 0⤋
Sure but if you want to steer right or left a solid axle might be a problem. Now just the center section won't swap. Different size of ring gear almost the same ratio. Smaller gear to get under the engine oil pan.
2006-09-20 23:09:01 · answer #2 · answered by John Paul 7 · 0⤊ 0⤋
if you have the same gear ratio, which it should, the internal parts ring and pinion spider gears, bearing should be the same, but not the housing. if you have different gear ratios then your blazer was built with factory left over parts from previous year, I see this a lot with gm and ford vehicles
2006-09-20 23:38:14 · answer #3 · answered by taknadvantageof 2 · 0⤊ 1⤋
Nope
2006-09-20 23:12:18 · answer #4 · answered by d_cider1 6 · 0⤊ 0⤋
no I'm sure you cant,,i own a repair shop,,and i have a 91 model and I'm sure it wont fit the gears are different in them,,same ratio,,but designed different to accept the different axles,,good luck i hope this help,s.
2006-09-20 23:19:00 · answer #5 · answered by dodge man 7 · 0⤊ 0⤋
Only if you plan to go in a straight line forever.
2006-09-20 23:33:59 · answer #6 · answered by Trump 2020 7 · 1⤊ 0⤋
That would be a No!
2006-09-20 23:09:11 · answer #7 · answered by baby_thumper_girl 2 · 0⤊ 0⤋
no
2006-09-20 23:04:34 · answer #8 · answered by mommy2savannah51405 6 · 1⤊ 0⤋
won't work
2006-09-20 23:06:00 · answer #9 · answered by zak_z 3 · 1⤊ 0⤋