I drive a '94 Ford Taurus and this weekend suddenly my turn signals totally stopped working. I don't even get the clicking lights on the dashboard display!! What should I look for to find out what's wrong?? Thanks for any help.......
2006-09-19 08:51:57 · 11 answers · asked by Elijah 2 in Cars & Transportation ➔ Maintenance & Repairs
Try changing the fuse. Sometimes the fuse might just stop working properly instead of just not working at all. Good luck!
2006-09-19 09:01:15 · answer #1 · answered by Gothic Martha™ 6 · 0⤊ 0⤋
Hello and good question.
To start of with - make sure that your hazards are working - some systems use power from the hazard relay to supply the turn signal realy.
If no light flash on either position Left or Right when switch is activated id say perhaps the turn signal realy but make sure all Fuses are good.
Good Luck
2006-09-19 08:56:18 · answer #2 · answered by CAR GUY 3 · 0⤊ 0⤋
under the dash on the drivers side (in or close to the fuse panel)there
should be a silver round shaped thing called a flasher. Try replacing that,
its fairly cheap and found at any local parts store and some gas stations.♠
2006-09-19 09:14:41 · answer #3 · answered by ? 1 · 0⤊ 0⤋
it may be your swap for the blinkers?yet may well be the flasher below the sprint, close to the fuse panel on some automobiles. There are (2 flashers, one on your emergency flashers,and your blinkers have A seperate flasher. Unplug one see if the emergency flashers paintings nevertheless?in the event that they paintings,its the different flasher for the blinkers,(replace the different one. in the event that they dont paintings! its nevertheless the different flasher. plug that flasher back in (its reliable) sounds perplexing yet its no longer difficult to do.
2016-12-12 11:16:45 · answer #4 · answered by ? 4 · 0⤊ 0⤋
For little money, replace the blinker solenoid (relay). Takes 2 minutes once you find it. Look in the owners manual.
2006-09-19 08:57:45 · answer #5 · answered by RANDLE W 4 · 0⤊ 0⤋
on or around the fuse box, there should be a round cylindrical relay. pull it out and replace it. i bet thats the problem.
2006-09-19 08:57:27 · answer #6 · answered by BIG DADDY 3 · 0⤊ 0⤋
Change the signal bulb!
2006-09-19 08:54:19 · answer #7 · answered by CATHOLIC PRIEST!! 4 · 0⤊ 0⤋
Your blinker broke..lol
2006-09-19 08:58:52 · answer #8 · answered by Anonymous · 0⤊ 0⤋
Perhaps you should take it to the shop? Or you could do it the old iPod way and beat it till it works again :)
2006-09-19 08:54:42 · answer #9 · answered by Anonymous · 0⤊ 1⤋
It is probably your flasher unit which is under your dash board. It is cylindrical shaped.
2006-09-19 08:58:32 · answer #10 · answered by diaryofamadblackman 4 · 0⤊ 0⤋