I have an emachines desktop computer with a belkin wireless g card. My wireless network is being picked up by the card, and when I type in the correct WPA password, it won't connect. My laptop is connected to the network just fine. I've connected to the network with the same deskop and adaptor perfectly in the past, but now that I have cloned and switched the hard drives it won't conncect. NOTE: i HAVE the most up-to-date driver for the card.
2006-09-19 08:26:29 · 4 answers · asked by alexmg2420 3 in Computers & Internet ➔ Hardware ➔ Add-ons
Take off the WPA and unhide your SSID if it is hidden. Try to connect without all the security. If that works, then re-apply your security. If it doesn't work at that point, then redo your security on your router. Ensure you do not misspell your password.
Good luck!
2006-09-19 09:17:06 · answer #1 · answered by dhagan22 2 · 0⤊ 0⤋
Have you made sure that your desktop is in the range of your wireless network and you getting atleast strong or medium signal.
2006-09-19 15:36:08 · answer #2 · answered by Karan 3 · 0⤊ 0⤋
You probably have to goto the admin login online for your adaptor, and configure and connect online. It needs setting up again.
Good Luck
2006-09-19 15:31:36 · answer #3 · answered by ME*UK 5 · 0⤊ 0⤋
Is your IP static or dynamic?
2006-09-19 15:28:22 · answer #4 · answered by Akkakk the befuddled 5 · 0⤊ 0⤋