I have a Intel Celeron 2.3Ghz PC. But not its stop working suddenly; I did not move/add/remove anything. The Tower front light is on but nothing comes on the screen. Power button is not working either. Moniter work probley with other conputers. What could be the problem. What can I do now.
2006-09-19 02:25:19 · 17 answers · asked by sivakanthan 2 in Computers & Internet ➔ Hardware ➔ Desktops
thta could be 1001 things im afraid,faulty psu,motherboard,harddrive,get a friend to have a look for you.
2006-09-19 02:27:14 · answer #1 · answered by Alfred E. Newman 6 · 0⤊ 0⤋
Try turning it on and hold down the F8 key or press it repeatily
from the sec you turn on and see if anything.. check that your moniter cable is pluged in , not the power coed..
2006-09-25 11:34:17 · answer #2 · answered by John Hopper 2 · 0⤊ 0⤋
this is refered to as Power on No POST. the unit powers on but fails to POST (Power On Self Test) Replace the ram with known good ram, remove the HDD/Optical Drive (just unplug the power cable fr the pwr sply)only thing you want in ith system board is ram and a video card. to see if you get video. If you do w/ new ram plug in the HDD and optical drive seperately WITH THE UNIT UNPLUGED) if this works then the prob is RAM if not and you still get Nada with everythng unplugged then the system board is gone and you need to replace it
2006-09-24 20:21:00 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Ive seen this a hundred times and know for sure it is you Video Graphics card. Buy a new one, they range in prices. The cheapest on will work fine. Change them out and there ya go.
2006-09-26 22:45:38 · answer #4 · answered by Dreamlander 5 · 0⤊ 0⤋
Have someone check the power supply. If it is okay, then I think it might be the motherboard. Have someone take a look at that too.
2006-09-19 09:33:51 · answer #5 · answered by Thor 5 · 0⤊ 0⤋
U have to delete the whole window and re install it or u had too many virus that messed up your computer and u wll have to buy a new one
2006-09-25 12:59:11 · answer #6 · answered by rusipatel125 5 · 0⤊ 0⤋
is it setup to go into hibernation mode try holding the power button in for 30 seconds and then try to restart it hope this helps!
2006-09-19 09:30:11 · answer #7 · answered by Anonymous · 0⤊ 0⤋
Your power supply probably went out.
2006-09-27 06:47:43 · answer #8 · answered by Dinkum 2 · 0⤊ 0⤋
Try to accees the bios
2006-09-24 16:05:25 · answer #9 · answered by Anonymous · 0⤊ 0⤋
diagnose :
1)remove ur RAM and clean it ,and put back in slot
2)check whether ur harddisk is detected at post boot process
3)check for loose connecton,ATAPi cable may be loose
2006-09-19 10:43:35 · answer #10 · answered by sanzsin 2 · 0⤊ 0⤋