if you have an owners manual, look in there.
Otherwise just reach down in the and turn the bulb holder and pull it out and replace it
Just make sure you don't touch the new bulbs with your fingers cuz it make cause it to burn out quickly and possibly explode from the oil's on your fingers.
2006-09-19 03:03:09
·
answer #1
·
answered by todd525525 2
·
1⤊
0⤋
Depending on which light it is the battery may be in the way. On the back of the light you'll see a big locking ring. Unplug the wire from the light,take off the ring and the bulb will pull out of the light assembly. When putting the new light in make sure not to touch the glass on the new bulb. Just touch the plastic. Oils from your hands getting on the bulb will cause the bulb to prematurely burn out.
2006-09-24 13:25:18
·
answer #2
·
answered by whtsthislif4 5
·
0⤊
0⤋
Pull the plug from the back of the light. If the brass connections on the light go directly into the glass of the light, you need to replace the whole headlamp. If the connections first go into a plastic circle, you should be able to turn it counter clock-wise (looking from the back) and just replace the bulb. Another way to tell if it is a sealed beam or not is to look on the front lens. If it says 1A1 or 2A1 in the glass, it is a sealed beam and the whole light needs to be replaced. Be careful when replacing a sealed beam lamp because the phillips screws are for aiming the headlight, and the Torx screws are for holding the headlight in.
2006-09-24 00:23:42
·
answer #3
·
answered by g_riz 2
·
0⤊
0⤋
1990 Honda Civic Headlights
2017-01-13 10:41:25
·
answer #4
·
answered by ? 4
·
0⤊
0⤋
Open the hood, reach down behind the headlight, unplug the wire turn toward your left , pull out the bulb.
2006-09-18 22:01:45
·
answer #5
·
answered by accesscard 3
·
1⤊
0⤋
It's called "CHILTONS" 1990 Honda Civic repair manual available at most auto parts stores for about 12-15 bucks! A very worth while investment for amateurs!!!!!!!!!!!
2006-09-25 02:12:35
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
REMOVE THE ELEC. CONECTION AT THE BULB.THER IS A LG RING ON THE HEAD LIT INSIDE THE ENGINE COMPARTMENT SIDE.REMOVE IT BUY TWISTING IT
BULB MAY COME OUT W/IT.YEA I OWN ONE OF THESE
2006-09-24 03:16:37
·
answer #7
·
answered by hotwrench215 2
·
0⤊
0⤋
since you a girl most autopart stores will replace it if you buy from them
2006-09-21 06:54:47
·
answer #8
·
answered by Stan 3
·
1⤊
1⤋