2006-09-18 05:33:50 · 18 answers · asked by tessarc 1 in Home & Garden ➔ Do It Yourself (DIY)
the felt idea would work. another simple trick would be to get some rubber dishwashing gloves, cut them into sheets, and place the sheets in between the joints....like the felt technique, you're going to have to basically break your bed down then pt it back together just lay the sheet in between the wood, put it back together then use a razor to shave off any excess material. i wouldn't go dousing any wooden furnature of mine with oil if i were you.....yeh it might stop the noise, but it's going to both stain your furnature, and depending on what kind of oil you use...possibly begin to deteriorate the wood.
2006-09-18 05:51:27 · answer #1 · answered by Anthony V 4 · 0⤊ 0⤋
1
2016-05-04 02:44:38 · answer #2 · answered by Gordon 3 · 0⤊ 0⤋
If wooden stairs or flooring creaks it's a sign that the wood is sagging and doesn't have proper support underneath. There's not much you can do unless you're willing to get underneath the staircase to find out if the supports are weak.
2016-03-17 22:31:24 · answer #3 · answered by Anonymous · 0⤊ 0⤋
In the event that you need to discover pleasant thoughts for woodworking I can propose you to check here http://woodworking.toptips.org
It's perfect in the event that you are simply starting out or in case you're a prepared carpenter.
It has thousands and thousands of woodworking arrangements and you have a CAD/DWG software to view and alter the arrangements. You have regulated instructions with photographs and excellent blueprints and schematics. On the off chance that you are a beginner this is the simplest approach to start your woodworking projects, and on the off chance that you already have experience you can at any rate discover a ton of interesting thoughts!
2014-09-27 03:29:35 · answer #4 · answered by Anonymous · 0⤊ 0⤋
In the event that you are searching for woodworking plans you can discover a huge number of woodworking plans here:
http://woodworking.toptips.org
It's the perfect result in the event that you are simply starting with woodworking and also in case that you have already experience with it.
You can discover a ton of woodworking arrangements and you will have the capacity to deal with the projects with a CAD/DWG software. It permits you to alter the projects and to alter the arragements.if you are a beginner this is a great approach to start. It's the best approach to woodworking; and on the off chance that you already have experience you will discover a considerable measure of plans and inspirations to improve your capabilities with woodwork.
2014-09-27 04:34:02 · answer #5 · answered by Anonymous · 0⤊ 0⤋
There were so many woodworking plans with this collection and you will not believe this but there are over thousands plans in the one package deal. Go here https://tr.im/LAgzj
This is really something to find that many all together. For someone like me who is just really starting to get involved with woodworking this was like letting me loose in a candy store and telling me I could have anything I wanted. That was my dream when I was a kid.
2016-05-01 03:09:41 · answer #6 · answered by Anonymous · 0⤊ 0⤋
Rub vaseline or similar where the wood joints are.
the creak is only wood rubbing against wood.
2006-09-18 05:35:27 · answer #7 · answered by PollyPocket 4 · 0⤊ 0⤋
Undo the slats where they touch the frame. Insert felt into the gaps, tighten slats. Job done.
2006-09-18 05:35:52 · answer #8 · answered by stevensontj 3 · 0⤊ 0⤋
Try putting talcum powder on all the joints - it worked for me - and your bed will smell nice!
2006-09-18 05:36:18 · answer #9 · answered by Fluffy 5 · 2⤊ 0⤋
the wood is dyed out add moisture ti the air tighten the screws or re glue the joints. if needed after the wood get the moisture it needs
2006-09-18 05:45:02 · answer #10 · answered by norsmen 5 · 0⤊ 0⤋