ive got an ordinary 5 litre petrol can full with unleded petrol how much two stroke oil do i have to mix in?

Question

with the petrol to get a two stroke useable mixture .using it in a ts 125 because oil pump aint working about a b reg i no its about 25-1 i think but how many parts of a litre to 5 litres of petrol

Answer 1

1 litre = 5000cc
5000cc divided by 25 = 200cc
200cc per 5000cc (or 1 litre) = 25-1

Answer 2

Got a manual? They should tell you what proprtion it is normally mixed to. Word to the wise.--- This is a good move, I have seen many engines burned up because the oil doesn't get mixed int to the gas for some reason (bad oil pump is a good one!) There have also been a number of cars with 2 cycle engines that have been ruined because the "automatic" mixing of fuel didn't occour!


Calll Dealer and ask what mix should be, - if you don;t have other scources available! You can get the measure in conversion tables (from sae -to - metric) on internet also! (find out how many ounces of gas is 1 litre, - or how many ccs of oil is 1 litre).
From there you can then get right mix by using the approprioate conversion (to make two of the same) standard measurenment!

Answer 3

If your sure the mix ratio is 25 to 1 then you need 5 divided by 25 or .2 liters of oil for each 5 liters of fuel. Make sure the mix ratio is correct. Some outboard motor engines use mixes as rich as 10 to 1. Make sure you mix thoroughly.

Answer 4

Should be a 50 to 1 mix, so 100 ml oil per litre of gas.

Answer 5

25:1 is a little on the rich side. You need to ask your local bike shop I would suggest for a 125 around 32:1 is a better ratio else you will clog up your plug all the time.

Answer 6

Before assuming its the oil pump, Have a look in the 2stroke tank to make sure the outlet isnt blocked.
Those tanks have a funnel shaped sump which is the perfect size for the paper disc that seals the lids of 2stroke oil bottles,

Answer 7

The ratio should be on the oil bottle. The ratio will vary from brand to brand.