i drive a honda prelude
2006-09-17 16:37:00 · 5 answers · asked by crazywierdo@sbcglobal.net 1 in Cars & Transportation ➔ Maintenance & Repairs
it still moves sometimes
2006-09-19 17:20:14 · update #1
If you did it yourself You need to look at the clutch slave it needs to bleed after changing the clutch also if you did it yourself it may be reversed this can happen and now it does not touch the clutch plate so no matter how power is applied no movement ,If you are talking about the engine then one has nothing to do with the other also if yu burned out the clutch it may be the clutch plate is bad as well it can be glazed from heat and notmaking a good surface to use
2006-09-17 16:43:38 · answer #1 · answered by freeby1011 2 · 0⤊ 0⤋
Just to make sure did you use the plastic stick that come with the clutch to centered? Reason why I am asking is because if you did not use it it is likelly that you broke the clutch plate. also check the clutch hydarulic line and see if the throw out plate is mooving. Good luck!
2006-09-18 14:01:06 · answer #2 · answered by josebikerider 2 · 0⤊ 0⤋
did you get the clutch in wrong,i mean it could be in backwards,if it is then it wont move.
2006-09-18 00:04:48 · answer #3 · answered by Anonymous · 0⤊ 0⤋
have it towed to the nearest Honda dealer.Have them fix it.
2006-09-17 23:42:09 · answer #4 · answered by U can't B like me 5 · 0⤊ 0⤋
did you put the plate in backwards?
2006-09-21 23:36:23 · answer #5 · answered by dennis c 2 · 0⤊ 0⤋