recently i had another signal light lever put in because the original one broke but my signal lights worked fine for months,then one day they started to work then sometimes they wouldn't then all of a sudden nothing all the other panel lights work even the hazard lights, what could be the problem?
2006-09-17 07:51:39 · 5 answers · asked by centuar 1 in Cars & Transportation ➔ Other - Cars & Transportation
This happend to me. It was my Relay underneath my dash.
From what i understand the relay controls the electrical part of the car.
The mechanic had to replace my relay with a new one....it took him about 10 minutes to do so but about a week for the part to come in from the dealer.
I hope this helps.
2006-09-17 07:55:48 · answer #1 · answered by bi_cali_chick86 2 · 0⤊ 0⤋
the hazard flasher module is seperate from the turn signal module. you probably have a good hazard module and a bad turnsignal module. they are plug-in modules or (cans) normally located under the left dash ,around or in the fuse block area.
you can get a new one at any auto parts store cheap.
If that doesn't do it, take it back to whoever replaced your lever
and tell them they screwed up.
good luck
Ken
2006-09-17 15:05:25 · answer #2 · answered by Anonymous · 1⤊ 0⤋
This sounds like a bad relay to me as well... or perhaps some faulty wiring... both of which are fairly simply fixes. I would return the car to where you had the work done and ask them to help you.
2006-09-17 15:11:05 · answer #3 · answered by Porterhouse 5 · 0⤊ 0⤋
The turn-signal relay is bad. Have it replaced.
2006-09-17 14:59:55 · answer #4 · answered by oneporkchop 2 · 0⤊ 0⤋
your flasher may be bad but it could also be a filament proments.Chances are though the repair just went bad.relacing the switch is pretty tricky,if not correctly done one of the little ballbearings in the switch will work loose.
2006-09-17 14:57:53 · answer #5 · answered by jgmafb 5 · 0⤊ 0⤋