English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

what petrol mix would you use on the bike above ?

2006-09-17 02:04:40 · 5 answers · asked by Anonymous in Cars & Transportation Motorcycles

5 answers

Premium unleaded and Amzoil at a 30:1 mix ratio.

2006-09-17 10:01:20 · answer #1 · answered by exert-7 7 · 0 1

It depends on the brand of oil, and how aggressive of a rider you are. I ran 32:1 in my cr125r because I was a real aggressive rider. I run 32:1 in my cr250r as well. If you aren't aggressive, 48:1 will be fine. Usually your best bet is to try both and see what works out better for you. Run 32:1 first, and if you foul out a lot of spark plugs, then try 48:1.

2006-09-18 10:59:03 · answer #2 · answered by atvman_400 5 · 0 0

32:1

2006-09-17 02:12:05 · answer #3 · answered by Traveler 3 · 0 0

I use 32:1 in my CR250.
Kids some times lug around in 1st & 2nd gear without winding out the motor and foul the plug. I've thined out their mixture to 42:1 with no problem.
If you're fouling plugs @ 32:1 - thin it out in steps till you get the right combination.

2006-09-17 06:55:28 · answer #4 · answered by guardrailjim 7 · 1 0

32:1 to 24:1 depending on how hard it's ridden, the type of oil used and the octane level of the fuel.

2006-09-18 01:28:40 · answer #5 · answered by Anonymous · 0 1

fedest.com, questions and answers