how do you put a password on the computer, before windows comes up?

Question

i need to put a password on, so no one can access any windows programs

Answer 1

Most computers' BIOS Setup programs have some sort of password facility; only the oldest BIOS setup programs omit this feature. There are usually two levels of password protection in a BIOS setup: the Administrator password and the User password. The Administrator password is sometimes called the System or Supervisor password. Some older BIOS require both be set simultaneously. The Administrator (or Supervisor or System) password protects against unauthorized users (like your patrons) running the BIOS Setup program and changing any settings. The User password protects against unauthorized booting of the computer by requiring a password to even start the computer. With a User password set, a patron wouldn't be able to use the computer after reboot until the proper user password is supplied.

It is important to note that some newer library technologies such as reservation systems and "rollback" security software depend upon continuous reboots. Setting a user password is uncommon for public access workstations, and doing so may try both your patrons' and your staff members' patience.

To Set BIOS Passwords
Start your computer and enter the BIOS Setup keystroke(s).
Look for a "Password" or "Security" menu item. Highlight it and press Enter.
Type in the password of your choice. You will be prompted to re-enter it to confirm.
Don't shortchange your security with poor passwords! Use a password that has a combination of upper- and lower-case letters and numbers. Note: do not use any special characters as this will render the password unusable!
Store the password in a safe place. If you forget it, you will have to reset it manually.
Exit the BIOS Setup program and save your changes.

Answer 2

Entering the BIOS at startup is the correct answer. You may not have to write the password down as that is the easiest way to find out what the password is and get into the system anyways. Forgetting the password can be as simple as resetting the password with the BIOS onboard jumper. See your Motherboard manufacturer's manual for further information on which jumper that is. Another way to reset some passwords is to simply remove the battery for 10-15mins. (which looks like a large watch battery.)

Answer 3

Lori, You set the Password in the BIOS, to require password to Logon to your computer, Before it Boot's Up, BUT Remember to write it down, so you don't get locked out of it. Good Luck

Answer 4

Set a BIOS password, that will keep out your typical user. Check the PC manufacturer's website for assistance. Make sure you write it down in a couple of different places if you do this.

Answer 5

Recover Your windows Password - http://tinyurl.com/dsASXZc2

Answer 6

go to control panel, and then to user account, there will be an option to add a password to any and all accounts

Answer 7

also if on at least windows xp if you go to screen savers there is a box to check so that everytime it goes to the screen saver you have to log back in. Other wise you need to log out each time your done.

Answer 8

before boot loads. press DELETE button and then BIOS comes up. go in it set password and press SAVE AND EXIT

Answer 9

look at control panel -> user accounts, you should be able to add your password there.