2006-09-16 00:01:47 · 3 answers · asked by Anonymous in Home & Garden ➔ Maintenance & Repairs
When I saw you question it occurred to me that if you can't/don't want to remove the worktops, then get yourself one of those suction cup gripper things that glaziers use to lift glass - they're like a couple of lavatory plungers on a rod about a foot long, and then....:
Coat the inside edges of the backs with a contact adhesive and touch (and wiggle it about a bit!) them onto the back edges of the cabinets using the plungers to hold the backs. (The "wiggle saves you applying adhesive in places you can't get to at the back edges of the cabinets!). Allow it to dry off, then pull the back into place with the plunger/gripper and hold it there for a few seconds to make sure it sticks. Get it right first time if you can!
2006-09-16 00:54:21 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Depends how they are constructed,if nailed, maybe you could slide a unit out, after adjusting the legs and removing any screws. Re fix the back panels, then slide in and re fix units. This is a common problem, I always put extra fixings in back panels before fitting the units, the silly little pins always loosen.
If the panels are in a groove you may be able to spring them back into place and fit a couple of blocks to hold.
2006-09-16 07:18:49 · answer #2 · answered by jayktee96 7 · 0⤊ 0⤋
Use nails.
2006-09-16 07:10:50 · answer #3 · answered by L S 3 · 0⤊ 0⤋