2006-09-15 08:17:05 · 12 answers · asked by taufique a 1 in Computers & Internet ➔ Hardware ➔ Desktops
Keep your finger on F8 while booting. Choose [safemode] and fix the problem by going into [programmes] [system restore] Restore your pc to a date where you know it worked. And walla: I think I deserve the best answer!!!!!!
2006-09-15 08:21:23 · answer #1 · answered by Just enquiring/ inquiring 4 · 0⤊ 1⤋
Something is not happy in your computer!
It could be anything,
Failing RAM
Failed RAM
Failing Motherboard
etc
Do a google for the sounds, eg, "3 short bleeps at computer start-up."
Hope this helps!
Jay
2006-09-16 18:18:05 · answer #2 · answered by Spikey_Jay 2 · 0⤊ 0⤋
I have had this problem on two PC systems and each time the memory was not seated properly. Simply remove and refit the memory sticks.
Other less likely reasons
Processor fan failure which usually destroys the processor.
Stuck key on keyboard
CMOS fault
2006-09-15 17:24:18 · answer #3 · answered by James M 1 · 0⤊ 1⤋
It is usually a RAM problem, if you are lucky enough to have to stick just try one and then the other ar you might like to get yourself another stick anyway.
If you have tried to re-flash the BIOS then you are probably knackered, that will need a new motherboard.
2006-09-17 05:43:16 · answer #4 · answered by David Computer Guy 4 · 0⤊ 0⤋
4 beeps Concept in Hardware Technician:
1. Continues fast beep without stoping is a memory boot problem... solution: change your RAM...
2. Continues slow beep without stoping is a Processor problem... solution: change your Processor or CPU...
3. Continues beep and stop at a few seconds is a video card problem... solution: change your Video Card...
4. One beep is the normal one and it means that your processor or CPU, RAM, and Video Card is fine...
check what problem is yours there...
2006-09-15 15:31:00 · answer #5 · answered by aRnObIe 4 · 1⤊ 1⤋
Basic Troubleshooting
Computer problem? Try the tips below as a start, then call
800 555 1212
Don't panic.
Relax. Many computer problems appear more serious than they really are. Yes, it may look like your hard drive has crashed and all your data from the last three years is irretrievable. But there are a host of problems that keep you from reaching your data that can be fixed, sometimes in a matter of minutes.
That's not to say catastrophic data loss does not happen — it does. Don't assume the worst, but rather...
Prepare for the worst — back it up.
When a serious problem occurs, be ready for it. Back up your important data. Most applications can be reloaded from CD so there's usually no need to back them up. Focus on your documents.
Make sure there really is a problem.
Can't start your computer? Check the basics.
Examine the cables, connectors, and power cords to make sure they're seated properly.
If you're using a power strip, or better yet, a surge protector, make sure it's on and that it works. Remember that a surge protector may not be working because it is designed to self-destruct. When a electric jolt is too much, your surge protector fries, saving your more expensive hardware.
Try plugging a lamp or radio directly into the electrical outlet to make sure there isn't a power problem.
Check to see if your monitor is on and the controls for brightness and contrast are not blacking out the screen.
Know your computer.
When you call the Help Desk at 800 555 1212, you may be asked specific questions about your computer based on the problem exhibited. It helps to know any of the following:
Brand and model of your computer — sometimes indicated on the front of the computer unit (e.g. Dell OptiPlex GM+ 5133).
Type of microprocessor and speed — sometimes indicated on the front of the computer unit (e.g. Pentium II 266 MHz).
Operating system (e.g. Windows 2000, Mac OS X, etc.)
Total RAM. Random Access Memory determines how many programs can run simultaneously on your PC, measured in megabytes. (e.g. 256 MB of RAM)
Size of hard drive(s) in gigabytes and amount of free space. To find this out, double click on My Computer. Right click on your C: hard drive. A menu should appear. Select Properties. A screen will indicate hard drive size and show a pie chart of used versus free disk space. Mac users: control-click on your hard drive and select "Get Info..."
Peripheral devices. (e.g. Zip drive, local or network printer, modem, scanner, etc.)
Size and manufacturer of monitor. (e.g. 17-inch Sony Trinitron color monitor)
Purchase date and warranty information. Is it still under warranty? If it is, the manufacturer may fix it for free.
Application manufacturer, name and version of problematic software. (e.g. Microsoft Word XP); also what other programs were active when you experienced problems?
Look for clues and write them down.
What tipped you off to the problem? Sometimes it's an error code or message displayed on screen. Be sure to write it down — it may describe the problem and how serious it is. Not all error messages appear on your monitor. Some computers play a series of beeps upon startup to indicate a hardware problem. Count the number of beeps and any significantly long pauses between beeps.
Other times you get no warning — everything just freezes. Message or no message, be sure note what was going on when the problem occurred. Were you starting your computer? Were you on the Windows desktop? Were you in a particular application?
Think about what changed recently on your computer.
Try to pinpoint when the trouble first started. Did the problem coincide with any recent changes?
Have you changed any of your system settings?
Any new software installed or updated?
Any new parts put into your computer?
Any peripherals been added or removed recently (such as a printer, Zip drive or external hard drive)?
Has anyone else been using your computer recently? How did he or she use it?
Determine repeatability.
Try to duplicate the conditions in which the problem occurred. Does the problem occur every time? Has it occurred intermittently over the last week or month? Does it happen when you do a specific action?
Reboots can do wonders sometimes.
System crashed? A simple reboot may clear up the problem. Go to the Start Menu (or Apple menu) and select Shutdown. Didn't work? It's time to try a forced reboot — with, unfortunately, no way to save your work — by pressing the keys CTRL-ALT-DEL (Mac: CMD-CTRL-power) simultaneously.
If that didn't work, you have no choice: you have to turn the computer off with the power switch. Wait 10 seconds and then reboot.
If the computer starts up, launch the applications you were using when the crash occurred. Some programs, like Microsoft Word, make timed backups of your work and may bring up recovered files. Save these files under different names and compare them to previous saved files.
If the computer does not start up (or, it does, but the operating system and/or applications crash continually), call the IT Services Help Desk to arrange for service.
Scan for Viruses.
Use the latest virus protection software (downloadable on campus) to scan for those pesky viruses.
Stumped? Call The Help Desk is ready to assist you with computer problems.
2006-09-15 15:24:39 · answer #6 · answered by god knows and sees else Yahoo 6 · 1⤊ 3⤋
Count the number and interval of beeps, refer to this webpage:
http://www.pchell.com/hardware/beepcodes.shtml
2006-09-15 15:19:34 · answer #7 · answered by anonymous_dave 4 · 0⤊ 0⤋
My pc did that when I had bad ram
try re-seating your RAM or puttin another stick in
2006-09-15 15:26:31 · answer #8 · answered by Misanthropy 2 · 0⤊ 1⤋
Check the battery on your Mother board
2006-09-15 15:21:24 · answer #9 · answered by Momma22632 2 · 0⤊ 2⤋
might be your memory that is not working (dodgy) try opening it and making sure that the memory module is in its slot....also remove it and dust it....if it dznt wrk a new memory module will be required
2006-09-15 15:21:13 · answer #10 · answered by teeeck5 3 · 0⤊ 1⤋