English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have removed the door panel. Does anyone know which wires to short out on the switch block to raise the window as it might be the switch issue. Any suggestions gratefully received.
Going on holiday shortly and need to get it closed as a short term fix and then spend some time when I get back.

2006-09-15 08:01:31 · 5 answers · asked by James M 1 in Cars & Transportation Maintenance & Repairs

5 answers

get another guy on outside to push up on window while your inside pressing switch and pushing up too.if you take off panel dont short out because the motor for window may be locked up.the red wire is the hot wire.try what is written first then if no luck disconnect wiring from motor and pull up window

2006-09-15 08:07:39 · answer #1 · answered by Anonymous · 0 0

A lot of the Nissans use a cable system to raise and lower the window these brake quite often if that is the case lift the window up and prop it in place with a board. to check the switch disconnect the wire at the motor and hook a test light between the two wires if the light comes on both ways the switch is ok. don't short out the wires.

2006-09-15 09:59:18 · answer #2 · answered by Mark G 4 · 0 0

Nissan Primera Electrical Problems

2017-02-22 03:16:23 · answer #3 · answered by ? 4 · 0 0

i might want to suspect that it develop into both tampered with or you probably did, in reality, overlook to close it after all (finished it myself). The circuitry for the electric powered abode windows is useless till the secret's switched on.

2016-11-27 00:49:01 · answer #4 · answered by ? 4 · 0 0

i carnt see it being the switch if the two swtches on the drivers door arnt working
proberbly the window moter or the complete unit nackerd

2006-09-15 19:02:05 · answer #5 · answered by witheringtonkeith 5 · 0 0

fedest.com, questions and answers