ok i wont to change the engion in my s10 i have a 94 s10 "4.3 super duty " in there now and i would liek a biger faster engion
for lil races but i was stuck on what to do
should i look for a engion or just put a super charge in there
also what engion would fit in my truck
2006-09-14 14:38:41 · 7 answers · asked by rvd4now2001 2 in Cars & Transportation ➔ Maintenance & Repairs
like how much would it cause i m only 16 and am now working so what would the price be like
2006-09-14 14:45:45 · update #1
you can fit just about anything you want in it you dont need a new computer or wireing only need to change a few wires and the computer will work all you need is a reprogrammer and little exhaust work but it is not that hard of a job to do the transmission will work also and dont let them talk you into spending all that money for a computer you dont need i have done this i have a s-10 with a big block 454 in it your computer will work so will the tranny
2006-09-14 14:48:48 · answer #1 · answered by firefightingexpert 5 · 1⤊ 0⤋
The LS-2 corvette motor will fit. Find a Wrecked GTO it too has 400 HP LS-2 engine. and transmission buy the whole salvage not just part of the car as you will need computer and wiring and instrument cluster in the dash.
2006-09-14 14:46:36 · answer #2 · answered by John Paul 7 · 0⤊ 0⤋
i say put the supercharger in ther... i had a 96 s10 with the 4.3 and manual and stock it wold pull the front tires of the ground red lining it and dumping the clutch.... so put the supercharger in it and play to your hearts content
2006-09-14 14:46:33 · answer #3 · answered by MstrChief55 5 · 0⤊ 0⤋
put a good small block 350 Chevy engine in it,,and it will be a lot faster,,they make a complete change over kit to do it with,,and it will give you all the power and speed you could ever want to have,, i have one that I'm building,,i ran across a good corvette engine to put in it,,there easy to change over,,good luck,,have fun with it,,i hope this help,s.
2006-09-14 14:46:17 · answer #4 · answered by dodge man 7 · 0⤊ 0⤋
a small block 305 or 350 will fit but it is alot of work and will be costly you will need exhaust and wiring and a new computer etc... all of this stuff is available .. in the aftermarket
2006-09-14 14:43:46 · answer #5 · answered by talkinggoat 1 · 0⤊ 0⤋
If you do mechanic work like you spell- I'd leave the thing just the way it is and go back to school! ON THE BUS!!!
2006-09-17 14:50:27 · answer #6 · answered by Anonymous · 0⤊ 0⤋
first learn to spell JACKASS
2006-09-14 14:48:24 · answer #7 · answered by alex v 1 · 1⤊ 0⤋