I cannot get my Print settings to stick, and the preinter will not print off the network now, does any one know where I can find instructions or a manual on line to use?
Please dont write "try the tech support for HP" I have had it up to 2 ft over my head with them.
2006-09-14 10:17:55 · 5 answers · asked by my_names_do_not_work 2 in Computers & Internet ➔ Hardware ➔ Printers
http://search.hp.com/query.html?cc=us&lang=en&qt=HP+laserjet+1320+manual&la=en
go here and select the correct modal for its manual
2006-09-18 00:34:21 · answer #1 · answered by Anonymous · 0⤊ 0⤋
tho you didn't give enough info I'm assuming you trying to set this printer up for use on a network.........
if this is the case then what you'll need to do is give the printer a static or manual ip address.
once the printer is plugged into the network print out a confiuration page. this will give you the temporary IP address recieved from the DHCP server.
open your web browser and type the ip address as a URL. this will take you to the printer's web interface where you can change the ip address from DHCP to Manual or Static. press apply to save the changes and you're done.
2006-09-14 13:06:24 · answer #2 · answered by Anonymous · 0⤊ 0⤋
just use your print to your local port / stand alone not as your network printer, and reinstall your drives too as lpt 1 not as print server
2006-09-15 12:14:32 · answer #3 · answered by lepactodeloupes 5 · 0⤊ 0⤋
hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi hi
2006-09-14 10:18:46 · answer #4 · answered by Anonymous · 0⤊ 1⤋
thanks for the 2 points!
2006-09-14 10:19:13 · answer #5 · answered by Anonymous · 0⤊ 1⤋