I am thinking of installing a Flash water heater in my basement to make a little more room for storage.
But I have'nt found a whole lotta info on them verses normal tank heater, I have 2 bathrooms, laundry and a dishwasher, will a Flash system stand up to the load ?
If so what size would I be looking for ? as there are so many sizes and makes.
Thanks for you help.
2006-09-14 01:34:07 · 6 answers · asked by aus2can 1 in Home & Garden ➔ Maintenance & Repairs
Gas systems are good electric whole house systems are not there yet.
Rinnai Continuum is a good selection for what you describe. It will run 2 major appliances at a time (shower, laundry and dishwashers are considered major)
For sizing look at the flow rate (expressed in gallons per minute).
A tankless heater can deliver up to 160 degree F water temps. With increased temp you get decreased flow rate. 104-120 degrees is the ideal setting for domestic hot water.
Install it before Jan. 1, 2007 and you are eligable for a $300 tax credit.
2006-09-14 05:24:26 · answer #1 · answered by Dave 3 · 0⤊ 0⤋
I first heard about flash, or on demand, water heaters when I lived in Europe. They are great but they are different than the usual 50 gallon gas/elect fired waterheaters we are accustomed to using in the U.S.
When I moved into the old family home, I started looking for a demand waterheater to replace the old unit that has been in the house for years. I found that Lowes and Home Depot were the best sources because the local lumber yards and even the local plumbers, are not familiar with them.
I don't know if you can get one that runs on gas. From what I could learn, they need a good source of 220 VAC power and that may require some new wiring if you don't already have it available.
OH... I haven't installed it yet because the old waterheater is still hanging on... but it's day's are numbered, I'm afraid.
If you do put a demand heater in, please drop me an e-mail and let me know how you like it. Thanks.
2006-09-14 01:41:20 · answer #2 · answered by Anonymous · 0⤊ 0⤋
flash heaters don't produce water as hot as a tank heater, one would use them primarily to save space when that is a critical issue. The units are at least twice as much as a standard hot water heater, and have allot of controls that can fail compared to standard heaters. You would want a minimum of 150,000 btu for your load requirements, that would deliver water at about 100 degrees and may slightly reduce your pressure at the tap. I would probably upgrade to a 200,000 btu if I had your budget.
2006-09-14 02:50:56 · answer #3 · answered by T square 4 · 0⤊ 0⤋
Tankles warm water heaters are super it is merely about all they use in Germany. you will keep alot of money on Hydro as warm water tanks value to maintain the burner directly to maintain the water warm, tankless warm water heaters are super because you in trouble-free terms warmth the water you utilize on the time. smart purchase. reliable for our surroundings, your pc, maximum folk do no longer think of adequate approximately changing their systems to a minimum of a few thing new and greater powerful for the earth. reliable for you.
2016-12-12 08:13:45 · answer #4 · answered by ? 4 · 0⤊ 0⤋
electric heated water? get the tank & insulate.
electric & gas instant heater beware of minerals in your water as from well. wellwater tends to plug them eventually even if town water comes from well. surface water ok & save $ on gas bill.
talk to seller 4 load info.
2006-09-14 01:48:43 · answer #5 · answered by enord 5 · 0⤊ 0⤋
Pro - hot water 24x7, gas saver, tax credit
Con - not cheap but will pay for itself in savings.
Try Renai - I think that's how it's spelled. Pronounced Ren-eye. Also sold at Lowes & Home Depot.
2006-09-14 01:38:41 · answer #6 · answered by Jim C 5 · 0⤊ 0⤋