2006-09-13 17:48:14 · 3 answers · asked by gordon c 1 in Cars & Transportation ➔ Maintenance & Repairs
Release the belt tension and remove the belt. Remove one of the hoses from the pump, allow the fluid to drain into a container, unbolt the pump, unhook the other hose, remove the pulley using a p/s pump pulley puller, install the pulley onto the replacement pump, bolt the pump on, reattach both hoses refill with fluid, install the belt, start the engine and slowly turn the steering wheel from lock to lock several times, shut off the engine, check for leaks, fill the fluid to the proper level, shut the hood and drink a beer.
2006-09-13 17:55:30 · answer #1 · answered by lowrider 4 · 0⤊ 0⤋
1. Remove fan shroud 2. remove serpentine belt 3.remove power steering pump pulley (special puller required) 4, Remove bolts holding pump to bracket. 5. place a pan to catch lost fluid, then remove hoses from pump assy.
2006-09-14 00:58:05 · answer #2 · answered by frank26694 3 · 1⤊ 0⤋
remove the bollts,the belts, then put the new one.
2006-09-14 00:56:24 · answer #3 · answered by jp 6 · 0⤊ 0⤋