English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2006-09-13 16:58:03 · 3 answers · asked by theman_5 1 in Consumer Electronics Games & Gear

3 answers

Before you do anything, read this warning: http://www.llamma.com/xbox/Repairs/warnings.htm

Then, follow this tutorial (with pictures!): http://www.llamma.com/xbox/Repairs/crack_open_that_xbox.htm

You'll need a Torx 20 screwdriver to open the case, and a Torx 10 driver to do anything inside the case (such as removing the hard drive or DVD drive). You should be able to pick up a set of Torx drivers from your local hardware store or similar shops like Sears.

2006-09-16 22:04:13 · answer #1 · answered by toddos1 3 · 0 0

turn it upside down and the stickers on the bottom of the console take a screwdriver and place it on every one of the stickers and softly move it around on the stickers if you find a soft spot thats where one screw is take it out and check for more undreneath the stickers there are only 2 screws beneath the stickers one at the top and one at the bottom then to find the rest the feet on every corner take a flatheat screwdriver and pop them off and the last of the screws are there and once that's done its open. Note: the screws are not flathead nor philipshead screws but use a phillipshead screwdriver it will work if it dosent then try different sise that should do it. (Don't do this unless your warrinty wore off cause this will void it.

2006-09-13 19:07:22 · answer #2 · answered by Caboose 3 · 0 0

if u want to just open the disk tray all you have to do is press the open button and hit it on top right above the disk tray. it should open right when you hit it. this has happened to three xboxs mine and my cuzins, it worked on all of them. if you want to open the whole xbox then listen tok that other guy

2006-09-14 14:33:59 · answer #3 · answered by Ramon G 1 · 0 0

fedest.com, questions and answers