reheat it (carefully) until it's pliable then use rubbing alcohol to wipe it off.
2006-09-12 11:56:26
·
answer #1
·
answered by Nurcee 4
·
0⤊
0⤋
not positive how soaked in it really is. listed the following are 2 thoughts regardless of the reality that. If its in large section you would possibly want to position a bag of ice over it till the wax freezes and then this is going to easily %. correct up. If this is deeper into the bricks, get your iron! Plug it into an outlet outdoors and placed an previous towel over the bricks and iron over it till each and every of the wax receives warm and liquid again and the towel will soak all of it up. do in basic terms not plan on employing a valuable towel! sturdy success!
2016-11-26 20:22:03
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
heat it up some and when it turns to slag, you can scrape it right out no problems at all. It will not damage the brick. Just clean off the brick when you are done, preferably with water and if you can find "Murphys Oil Soap". That works great.
2006-09-12 11:58:15
·
answer #3
·
answered by timmy2505 2
·
1⤊
0⤋
I would scrape off what I could, then put a couple layers of newspaper over it and iron it with your iron set on high, maybe the paper will absorb the wax. Sorry, that's all I could come up with. Good luck.
2006-09-12 11:56:51
·
answer #4
·
answered by el 4
·
0⤊
0⤋
For carpets using newspapers or paper toweling and an iron works, so I'm sure doing the same on brick would work too! I hope you get it off!
2006-09-12 12:02:54
·
answer #5
·
answered by speedy_me18 5
·
0⤊
0⤋
Hold ice cube against it till it hardens, then pick it off with your fingernails.
2006-09-12 11:59:30
·
answer #6
·
answered by beez 7
·
0⤊
0⤋
Use a heater to melt the stains and eventually it will be gone.
2006-09-12 11:57:23
·
answer #7
·
answered by Sam X9 5
·
0⤊
0⤋
try ice.
or wax remover
2006-09-12 11:56:32
·
answer #8
·
answered by Denise 2
·
0⤊
0⤋
Put ice on it then chip it off.
2006-09-12 11:56:11
·
answer #9
·
answered by Homer J. 2
·
0⤊
0⤋
heat it with a propane torch
2006-09-12 13:44:07
·
answer #10
·
answered by Jack 5
·
0⤊
0⤋