The drum dosesnt come off like most it have a fairly lage bolt probally 1'1/4 in. but it apperars to be attached to a spindle and bearing. Do you need to take that off to properly change a rear wheel cylinder.
2006-09-12 10:41:08 · 3 answers · asked by Matthew D 1 in Cars & Transportation ➔ Maintenance & Repairs
Hyundai has the complete shop manual on line at:
http://www.hmaservice.com/
Click "Service Information" at the top.
You have to register and get a password but after that you can access the same information the shop has.
Hope this helps.
Pete
2006-09-12 14:56:50 · answer #1 · answered by Peter C 2 · 0⤊ 0⤋
does your drum have two little holes in it near the center? if so, you need to find correct bolts and slowly turn in it and drum slowly move outward. if you don t have two holes then you have to back off self adjuster from rear of the brakes then pull drum off.
2006-09-12 14:55:05 · answer #2 · answered by sleepydo 5 · 0⤊ 0⤋
Take atrip to wal-mart and buy yourself a chiltons repair manual
2006-09-12 10:45:21 · answer #3 · answered by muddbugg63 1 · 1⤊ 0⤋