Don't let any light come in...hehe just kidding.
Steps
1 - Find a place in your house or apartment that can be made totally dark. A bathroom with no windows, or a basement room, is a good place to start. A room with access to running water is a bonus.
2 - Buy the necessary supplies, as listed below in the "Things You'll Need" section.
3 - Set your darkroom up so there is a "wet" side and a "dry" side. The separation will minimize the possibility of making mistakes that could end up being very damaging to your photos.
4 - Align your trays so the first one is for the developer solution, the second tray is for the stop solution (which can just be water in most cases), and the third tray is for the "fix" solution. A fourth tray with running water piped into it, if possible, will be used for the "bath", or a simple tray with just water can serve the same purpose.
Things You'll Need:
• enlarger
• three adequately sized trays
• three sets of tongs
• 8" X 10" easel
• concentrated developer solution and fix
That's just an exerpt. See the 'source' below for a lot more useful building tips.
2006-09-12 05:25:50
·
answer #1
·
answered by endrshadow 5
·
1⤊
0⤋