English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

13 answers

go back to the dealership. A locksmith can probably make one but it will be more expensive. Dealership can punch in the VIN number, get the key code and make it right their (if the ignition is original).

2006-09-09 01:00:07 · answer #1 · answered by quikone2 3 · 0 0

My suggestion would be to call Buick directly and ask if they can send you a replacement key. Don't call the dealers they will have NO clue as to the ignition key cut and number. If that doesn't work then you will probably have to call a lock smith, or go the cheaper route and run to an auto parts store and pick up a new ignition for your vehicle and then remove the old one and put a new one it.
But From what I know GM keeps records of all vehicles made and the Vin should pull up a code for the key to be cut. Good Luck.

2006-09-09 01:00:26 · answer #2 · answered by baby_thumper_girl 2 · 0 0

Buick 1992

2016-10-15 07:03:27 · answer #3 · answered by ? 4 · 0 0

Bill and Djaca are correct that the easiest would have been to save the old lock cylinder. But if that is gone, you can still easily fix the problem. The new lock cylinder of the door handle is easily removed and reset to the old ignition key, I don't remember if a 97 Polo door handle has one screw and a hook, or has 2 screws so requires taking the inner door panel off. But once you have the handle off, there is just a phillips screw holding the lock cylinder in. Once that is out, you will notice the brass tumbler sliders. They come in various sizes, double sided. If you put the key in the cylinder, you will notice these tumblers are moved in and out to various depths. You need them all to be flush, so that the cylinder can turn when the key is in. You can try exchanging tumblers around, remove some completely, or file some down as necessary. When you are done, as long as nothing sticks out, the key then will work, and you can reassemble. In reality, if you only leave 1 tumbler, the lock will still work, and no one will know how easily it could have been picked or opened with the wrong key. But you can even buy additional tumblers inorder to make it perfect, if you want.

2016-03-27 03:52:23 · answer #4 · answered by Anonymous · 0 0

most older model gm vehicles have a pass-lock installed and if you loose the keys you may have to replace the hole tumbler assembly because there is about 15 different keys that was used in the pass lock system, the little chip was installed in the key, if by chance the vehicle didn't have pass-lock any gm dealer can punch a new key by the Vin # but you have show owner ship of the vehicle, legal reasons. the best way is to have it towed to your local gm dealer and let them diagnosis the system, dealerships are supposed to have a pass-lock coder if they if still have someone there that still knows how to use it. i would call first and speak with the service manager not the service writer.

2006-09-09 02:00:20 · answer #5 · answered by gerald d 1 · 0 0

The VIN number does no good. If you don't have key code numbers, then you will have to call a locksmith.

2006-09-09 00:59:21 · answer #6 · answered by WC 7 · 0 0

vin number and proof of ownership is all you need and the dealer can order you a new key just from the vin

2006-09-09 01:01:02 · answer #7 · answered by Anonymous · 0 0

A good modern locksmith can replace that key call around.

2006-09-09 01:11:18 · answer #8 · answered by John Paul 7 · 0 0

if it does not have the computer chip in it and you have a key then you can just have one made at your local hardware store if you don't have a key then you will have too replace the ignition switch

2006-09-09 01:03:43 · answer #9 · answered by ? 4 · 0 0

Go to your local dealer and they can cut you a new key. A good locksmith should also be able to help you.

2006-09-09 01:00:48 · answer #10 · answered by jefelps 1 · 0 0

fedest.com, questions and answers