took out the installation cd put it back in now nothing comes up to install the software.Walk me thru it please
2006-09-08 16:59:39 · 4 answers · asked by Peaches 2 in Computers & Internet ➔ Other - Computers
I got it working,thanks to all 4 ur advice.Except 4 the smartass who didnt know the answer and didnt know what to say.
2006-09-09 09:34:39 · update #1
Go to Control Panel, Select Add/Remove Programs and uninstall the software... Turn off computer, then reboot... Then, reinstall in the correct order...
2006-09-08 17:03:52 · answer #1 · answered by KnowhereMan 6 · 0⤊ 0⤋
A Sometimes the computer and camera have to be turned on in a particular order. So be sure that you are following the camera’s directions exactly (check the manual).
B Next, make sure your USB port is working by plugging in some other USB devices in the same port.
C If the port is okay, check your camera’s driver: Click Start, Control Panel. Double-click System (in Classic view). Select the Hardware tab. Then click the Device Manager button. Check under “Imaging devices” and under “Other devices” by clicking the Expand (+) button. If the driver is marked with an exclamation point, right-click it (you will need to uninstall and then reinstall the driver). Select uninstall from the pop-up menu. Then reinstall from the disc that came with your camera.
D Check for updates for Windows’ USB drivers at http://windowsupdate.microsoft.com Be sure to leave the camera connected to your computer.
E Check for a faulty cable: or the camera or cable might not fully meet USB specifications. You may have to buy a different USB cable—make sure that it bears a USB-IF (USB Implementers Forum) logo. You can see the various logos at the USB-IF Web site at http://www.usb.org/developers/compliance/logo/ (this is under the Developers tab).
The USB-IF site also provides listings of USB-compliant cameras (at http://www.usb.org/kcompliance/view/ , under the products tab). Your camera might meet the standard even if it is not listed—however, if it is missing from the list, the camera may or may not be compliant.
2006-09-09 00:41:31 · answer #2 · answered by williamh772 5 · 0⤊ 0⤋
Don't worry. It should be fine. It could have already been installed. Plug the camera in and check Control Panel > Scanners & Cameras. It could be there already.
If you want to install the software, insert the CD. Explore the CD. Usually there is a "setup" file which you can click and follow the installation steps.
Cheers & Bottoms Up
2006-09-09 00:03:27 · answer #3 · answered by Bambang W 2 · 0⤊ 0⤋
Did you read the directions??? That would help!! I can't walk you through it, I don't hold hands with girls!
2006-09-09 00:02:18 · answer #4 · answered by Anonymous · 0⤊ 0⤋