...probably some sort of mismatch w/transformer?? Seems to last for a while before the internal plastic 'clapper' ends up getting stuck and melting somewhat. What do I need to look for, either with replacement bell or on transformer, to select correct parts?
2006-09-08 15:31:08 · 6 answers · asked by DrJunk 3 in Home & Garden ➔ Maintenance & Repairs
Replacement - have not had to replace transformer...
2006-09-12 01:33:25 · update #1
Link below on how to repair the doorbell system.
Also - How they work link.
2006-09-08 15:40:44 · answer #1 · answered by Anonymous · 1⤊ 1⤋
Doorbell buttons sometimes stick in the "pushed" position. This causes the solenoid to stay energized and get REAL hot!!! Replace the button. Since you've done this much work, the parts may not be compatible. I suggest replacing the entire system.
Remember: a door bell system can burn your house down.
2006-09-12 12:12:35 · answer #2 · answered by Anonymous · 0⤊ 0⤋
At the outside: Bell push presses but doesn t spring back out.
At the chime box: Dings but doesn t Dong
Solenoid still activated, and it s coil overheats. Strong smell of shellac.
At the transformer: Overheating.
Marvin s right...cheap doorbells can start a fire!
2016-01-29 06:11:28 · answer #3 · answered by ? 1 · 0⤊ 0⤋
Have you checked the doorbell buttons, if they stick in the pushed in the on postion that could cause your chime to over heat. Most Doorbell chimes come with a transformer when you buy them so I doubt it would it would be the problem. I am a electrician, feel free to email me thru yahoo if you want.
2006-09-08 15:48:59 · answer #4 · answered by danzka2001 5 · 3⤊ 1⤋
You may need to eliminate it entirely, at least at that location.
2006-09-08 15:37:54 · answer #5 · answered by Anonymous · 0⤊ 3⤋
have you checked the belt on the doorbell cooling fan?
sometimes they loosen up and need to be recalibrated...
2006-09-08 15:33:30 · answer #6 · answered by Anonymous · 1⤊ 6⤋