2006-09-08 08:58:12 · 6 answers · asked by Hossam Ezz 1 in Cars & Transportation ➔ Maintenance & Repairs
it feeds information to your vehicles computer letting it adjust the fuel/air mixture ratio at the intake side of the engine. You have 2, one before the catylic converter and one after it. They are usually about 3 inches in length, and have anywhere from 2 to 4 wires on them depending on the vehicle. Your catylic converter is usually located right after your exhaust (on your jeep) comes to a Y. Good luck.
2006-09-08 09:07:45 · answer #1 · answered by Zenas Walter 3 · 0⤊ 0⤋
it is a sensor in the exhaust just after the manifold. it will have 1 or 3 wires depending on the model (heated or not heated). take off the wires and it threads out like a bolt.
2006-09-08 09:05:05 · answer #2 · answered by native 6 · 0⤊ 0⤋
Located on the exhaust pipe and it reads your exhaust to let your engine know if you are getting more fuel or air than should be. You probably have multiple oxygen sensors.
2006-09-08 09:05:05 · answer #3 · answered by Anonymous · 0⤊ 0⤋
drivers side in the exaust with 2 to 4 wires going to it it helps with the fuel injection air fuel rato
2006-09-08 09:05:21 · answer #4 · answered by mobile auto repair (mr fix it) 7 · 0⤊ 0⤋
it is a sensor that on yous exost just past your manafold think it has somthing to do with smog emission
2006-09-08 09:06:23 · answer #5 · answered by cntcrum6942 1 · 0⤊ 0⤋
it feeds data to the engine management computer, it's in the exhaust pipe, why did yours break?
2006-09-08 09:02:20 · answer #6 · answered by Anonymous · 0⤊ 0⤋