Any new lock kit will have instructions, my only advice is to read them all the way through prior to doing the installation. Removing the old lock is a piece of cake just find and remove the screws. Actually installing the new lockset should be relatively easy as you do not have to drill new holes in the door.
Good luck!
2006-09-08 01:08:13
·
answer #1
·
answered by Redeft 4
·
0⤊
0⤋
It's easier than you might think. Go to the store and find a new lock - most come with instructions on removal an installation.
Good luck
2006-09-14 15:57:31
·
answer #2
·
answered by backhome101 3
·
0⤊
0⤋
An instruction booklet generally comes with the lock. If not
either look it up on the web, or contact the place where you
purchased it.
good luck
2006-09-15 11:58:28
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
Hello,
here is how to do it,
1)get the appropriate screwdriver.
2)loosen the screws holding it in place.
3)completely remove all bits and pieces.
4)follow instructions on how to install.
5)if the new lock does not fit ,you have to drill the hole out bigger.
6)they make door lock installation kits for around 24 euros
2006-09-13 12:32:41
·
answer #4
·
answered by crocadilen 2
·
0⤊
2⤋
All the different brands of lock-sets I have ever worked with came with instructions in the kit.
2006-09-08 08:18:00
·
answer #5
·
answered by ezachowski 6
·
0⤊
0⤋
Go buy the new lock .
Most have instructions in the box
2006-09-14 16:58:00
·
answer #6
·
answered by scary g 3
·
0⤊
0⤋
Usually, there are instructions that come with the locks. If it is like the one you are replacing, chances are you won't have to make any adjustments.
2006-09-08 20:58:05
·
answer #7
·
answered by woodenwater1959 3
·
0⤊
0⤋
most door locks come with instructions right on or in the package.
2006-09-14 21:29:53
·
answer #8
·
answered by deby k 3
·
0⤊
0⤋
buy your yale lock
when you open it there will be simple instructions that will tell and show how to fix it
2006-09-15 22:00:41
·
answer #9
·
answered by Anonymous
·
0⤊
0⤋
it's really not that hard. most new locks come with the instructions you will need.
2006-09-08 11:41:47
·
answer #10
·
answered by Swordsman 3
·
0⤊
0⤋