i just bought a new print cartridge and its in correctly..i push print and nuthing happen there were no word on the paper..
2006-09-07 16:23:03 · 6 answers · asked by alamoqueen91 1 in Computers & Internet ➔ Other - Computers
Check ur cables then take it out and put it back in
2006-09-07 16:24:54 · answer #1 · answered by Anonymous · 0⤊ 0⤋
If the paper is going through the printer, then your cables are connected, otherwise nothing would happen when you hit print. Take out the cartridge, did you take off that very thing tpe strip on the bottom, if so then jyst put your cartridge back in make sure it snaps, is it just a black and white printer or color too, if soo also take out the clor and put it back and make sure it snaps. if none of this helps go to HELP in your printer menu and it will give you a check list, good luck.
2006-09-07 23:30:00 · answer #2 · answered by Michael 5 · 0⤊ 0⤋
Are you sure the cartridge is in correctly?
Is it plugged in?
Is it on?
Is the paper jamed?
Is the printer selected on the menu?**
2006-09-07 23:30:33 · answer #3 · answered by Venus 3 · 0⤊ 0⤋
1. check the power supply
2. check the connection to between the printer and the CPU
3. run a diagnostic on the printer
4. power down the computer and printer, power both up and re-set.
2006-09-07 23:29:06 · answer #4 · answered by soxrcat 6 · 0⤊ 0⤋
is it turned on???
did u install that cd that it comes with?
maybe the cables are loose in the back.
sometimes in some printers there's an extra on/off botton on the back.
2006-09-07 23:29:42 · answer #5 · answered by 021-4-EVER 3 · 0⤊ 0⤋
Print out color levels
2006-09-07 23:28:21 · answer #6 · answered by EL Big Ed 6 · 0⤊ 0⤋