My iPAQ rx1950 can't boot or switch on even with the AC charger connected to it for chgarging.
Tried Soft & Hard Reset but can't help, I even plug the the AC charger into it, but no indication of Recharging on the LED near the ON/OFF switch. I connected my iPAQ to my PC, but system did not detect its presence. Nothing appears on my monitor.
Any kind soul please help me! If you know the manual way of "Flashing" its ROM (Example: Flashing the new ROM directly onto the PCB Board with some "cable".) I have tools to open the iPAQ casing, but just don't know what to rectify the problem everything on the PCB seem to be fine, no corrosion, no leaked, no dust & dirt, no spoilt button & LCD display is perfect (No crack & "bleed")
I really appreciate if you could guide me with as much details as possible to solve my iPAQ problem.
This PDA is quite a useful one, good for light-user light me with just surfing internet and play music :) Although at time it has slight problem.
Regards,
(^_^)
2006-09-06 20:47:20 · 2 answers · asked by Atomic Angel 1 in Consumer Electronics ➔ PDAs & Handhelds
Very little can be done with Main ROM error, If there is a solution to it, gotta ask HP for it, if the spec sheet says rx1950 uses Masked ROM, there is no help, period. Masked ROM is burnt statically not electronically Flashed.
2006-09-06 22:58:28 · answer #1 · answered by Andy T 7 · 0⤊ 0⤋
He's right...did you discount something surring a rom upgrade? Or try to load in another bootleg ROM...if so, you're @$$ed out...this is going to have to go back to HP, or toss it in the drawer as a paperweight
2006-09-07 05:07:05 · answer #2 · answered by bigdaddy_longstroke_2000 6 · 0⤊ 0⤋