2006-09-06 05:47:49 · 3 answers · asked by mo m 1 in Cars & Transportation ➔ Maintenance & Repairs
quite easy , you will need a small swrewdriver and a small piece of rigid wire you can put a small hook on the end . place the srewdriver between the winder( were it is attached to the door )and the door panel then apply gentle pressure , if you look down the length of the winder handle you will see a clip holding the winder to the mechanism (sometimes there is the door panel then a plastic washer then the handle,you will need to slide the screwdriver between the washer and the winder ) then get the rigid piece of wire (with the hook on the end ) slide it under the clip pull it gently and it will pop off . to refit it just pop it back on again . i normaly use an old coat hanger and flat the end with a hammer then form a hook with it .
2006-09-06 06:02:15 · answer #1 · answered by charlotterobo 4 · 0⤊ 0⤋
1: Buy a Haynes manual
2: Follow instructions
2006-09-06 12:51:06 · answer #2 · answered by Anonymous · 0⤊ 0⤋
are you talking about the Knob?
2006-09-06 12:50:32 · answer #3 · answered by doogie494 2 · 0⤊ 0⤋