Belkin router question (see details)?

Question

I need to be able to access my Belkin F5D7630UK4a router when it's in Bridge mode, but of course all the local LAN settings are then replaced by a WAN IP address and such. My ISP provides a ENET ENCAP/LLC adsl connection w/o HDLC framing, VPI0, VCI 34. PPPoE and PPPoA are out of the question.

Is there a way to configure this router to otherwise share the ADSL between wired and wireless computers, or can I only config the router when LAN is online and WAN is offline?

---
I didn't make this question so complicated on purpose, I assure you ;o)

Answer 1

The others do not get it. Once the router is set to transparent bridging then it no longer becomase acessible view an internal lan IP. Most routers therefore have a seriel port that you can plug into and use hyperterminal to access the router and reset it to routing mode.

Answer 2

there's a Belkin internet site someplace. What you fairly might desire to do is to reset the router as though it had in simple terms come out of the field. through fact you do not understand the password, you will might desire to do a handbook reset. There might desire to be a reset button (the variety you will might desire to adhere a pin in) someplace on the router. i'm uncertain in case you would be wanting the installation CD or not - in case you had cyber web get admission to you may desire to get carry of it. besides, that would desire to reset to production facility defaults and you will placed your person password on it.

Answer 3

You need to Use NAT which will share your internet settings but then you need to do port forwading for the WAN Address IP to be used and not a local....

Answer 4

hur hurrr

you said router, that sound a bit rude

Answer 5

this is what you need 1 router and if the other pcs are desktops wireless usb adapeter's
and this is how you set all that up
you conncet the ethernet cable to the back of the router on the port that is marked ethernet then you take the other end of the cable to the ethernet card on on the back of your pc you conncet it to the port marked ethernet

then you conncet the other cable to the back of the ruter port that is marked DSL then you take that cable to the fillter box conncet it to the port marked on the fillter marked DSL
then you conncet the filter cable box to your phoneline box
conncet the power cable to the router and put the power on
now you put in the cd driver that came with your router
and you install the network drivers
now you need to set up a network id & password on the router
you will be told how to do all that when you install the drivers & software for the router
when you have install the drivers and software fo r the router
your need to restart the pc
when your back at the desktop
you will see a network icon in the taksbar by the pc time
if it has a red X on it right click it and click on enable
if you dont see a network icon in the taskbar
click on start/control panel
click on
network and internet connections
icon
then click on network connections icon
now right click the
local Area connection
icon and click on properties
tick the box
show icon in notification ares when connected
tick the box
notify me when this connection has lkimited or no connectivity

now click on
then authentication tab at the top

tick the box
enable IEEE 802.1x authentication for network
tick the box
authenticate as computer when infomatiion is available
then right click
local Area connection
and click on enable
now your router internet will log online with in 45 seconds
when your router is online you conncet your phoncable to the filter marked
phone

now when your router is online

then you need to get in the router home page and click on the wireles lan icon
and you set up a network id for the laptop
and a security wpa key not a wep key dont use that one use wpa key
then you put a wireless usb adapter on the laptop you install the network drivers on the laptop for the wireless usb
then you click on the network icon in the taskbar by the time on the laptop right click on it go to properties then you click on view wireless networks then you click on advanced tab you put in the network id and security key that u set up on the router home back then you click apply & ok then you click on view wireless network's your see your network id click on that then click on conncet


if you have a wireless card in the laptop just

click on the network icon in the taskbar by the time on the laptop right click on it go to properties then you click on view wireless networks then you click on advanced tab you put in the network id and security key that u set up on the router home back then you click apply & ok then you click on view wireless network's your see your network id click on that then click on conncet

if you cant set that up

your be better off if you get you (isp)server to help you set all that up


also get this done


TO STOP ALL THAT FROM GOING ON your network

you do make sure you call your (isp) or this will happen
is your pc still slow & your internet you have done a full system scan
with your anit virus /anti spyware you even defragmenter your hard drive
done a scan disk but your pc is still slow and your internet is not as good
then you need to check your router it dont mater what router you have

people in the vicinity is on your network

you call your (isp)
GET THIS SET TO DISABLED

(GAMES & APPLICATION SHARING )
it dont matter what router you have you need to get
(GAMES & APPLICATION SHARING ) set to disable

is your router safe?
you need to call your (isp) server
they have to get you in to your router home page
then from there ..copy & paste the router home page
into a notepad then save that to a back up cd

now from there they have to take you to the part
where (GAMES & APPLICATION SHARING ) is
then you click on ( GAMES & APPLICATION SHARING) icon
then at the top of the page on the right your see
configure.. you click on configure
then you .. UN-TICK .. the box ( GAMES & APPLICATION SHARING)
that is ticked there ...
then you click look down the page your see
<<<
if you have a wireless router
and then ask them where you set up a wpa-security key dont use a 128bit wep key ask to use a wpa- security that is your router security key and you pick the wpa-security key not your (isp)server . just ask them where you set one up they will say use a wep-key ..ignore them you say your going to use a wpa.key and want to know how to set one up and remember you pick the wpa-key not your (isp)server or they will use your network

now you close off the page
and clean out your internet address bar