English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I put carburater cleaner and fast start and I can't keep it going . When I put these things in it runs good but then it stops. What do I have to do .Thank you Joe

2006-09-03 07:39:19 · 2 answers · asked by jh14230 1 in Home & Garden Maintenance & Repairs

2 answers

Possible the float is stuck closed in the fuel bowl. The generator runs until it uses up the fuel you are priming it with. Drain the fuel tank and remove the fuel bowl. Make sure the float operates freely. If it does, you will probably have to clean your carb. If it's stuck, get it operating freely and refill fuel tank with enough clean, fresh fuel to try again. Be moderate with the use of starting fluid as the fluid can wash the lube oil from the cylider walls and score the walls and the pistons. Good luck

2006-09-03 08:09:00 · answer #1 · answered by duaner87421 3 · 0 0

The gas has turned to gel. You need to rebuild the carb and completely clean the gas tank and line. also change filter.

2006-09-03 07:42:25 · answer #2 · answered by scrambledmolecues 3 · 0 0

fedest.com, questions and answers