Have tried bleach and mould remover spray but this has not worked!
2006-09-03 05:41:24 · 14 answers · asked by Elizabeth T 1 in Home & Garden ➔ Do It Yourself (DIY)
ignore any answers that suggest u can clean up the existing, IT WILL NOT WORK
You must cut out old and reapply new silicone, nothing else will do it, I know, i do this for a living!
2006-09-06 09:20:59 · answer #1 · answered by danchip 2 · 0⤊ 0⤋
Try white sealant mould remover
2006-09-03 05:48:52 · answer #2 · answered by karlos 2 · 0⤊ 0⤋
Definitely remove the sealant and renew it. It has lots of tiny holes in it which have got mould or fungus inside, and you have no hope of removing it. It probably isn't a modern sealant with fungicide in it, which will stop it happening again.
2006-09-03 07:13:44 · answer #3 · answered by Dave P 2 · 0⤊ 0⤋
this is the best mold and mildew romover
1 part bleach
1 part water
1 part simple green
spray and leave it alone for 15 or so and wash off high pressure or graden hose
works great of eves of house too any where you have grenn or mildew
2006-09-04 06:26:21 · answer #4 · answered by mr_jim51 3 · 0⤊ 0⤋
Dettox antibacterial mould and mildew remover is the best
http://www.ciao.co.uk/Dettox_Antibacterial_Mould_Mildew_Remover__72199
2006-09-04 03:24:18 · answer #5 · answered by Charli 2 · 0⤊ 0⤋
Tilex mold and mildew remover
2006-09-03 05:54:55 · answer #6 · answered by pnybt 4 · 0⤊ 0⤋
cut away old silicone with a stanley knife !then take blade out of knife, hold in fingers and gently srcap silicne reminents ! when clean reapply thin bead of silicone , wet finger and gently smooth off!
2006-09-03 06:53:52 · answer #7 · answered by Anonymous · 0⤊ 0⤋
scrape it of and buy antimould sealant and reseal the windows.
2006-09-03 05:52:07 · answer #8 · answered by yiannis the greek 4 · 0⤊ 0⤋
Scrape it off and recaulk the windows.
2006-09-03 05:43:32 · answer #9 · answered by medellia1984 3 · 0⤊ 0⤋
You'll have to scrape it off and recaulk if bleach does not work.
2006-09-03 05:52:26 · answer #10 · answered by Caroline H 5 · 0⤊ 0⤋