You need a lock smith. You are not going to get that sucker out yourself. No way.
2006-09-03 00:33:27
·
answer #1
·
answered by John16 5
·
0⤊
0⤋
If needle nose pliers don't work, put some super glue gel on the end the part of the key that's out and press it against the broken part. Hold it very steady for about five minutes. It then should be glued strong enough to extract it.
If you're good with tools, drill a small hole (a Dremel tool is good for this) in the broken key, fasten a straightened paper clip with super glue gel into the hole.
2006-09-03 07:40:08
·
answer #2
·
answered by 4999_Basque 6
·
0⤊
0⤋
magnet,dental picks,needle nose pliers,2 utility knives placed on the 2 sides and use a lever type motion,cussing a lot-then call the lock smith
2006-09-03 07:37:08
·
answer #3
·
answered by super stud 4
·
0⤊
0⤋
its not that hard if a little bit is still sticking out find some "needlenose" plyers and just pull it out or you may need to use a realy strong magnet to coax it out whatever you do dont push it in further
2006-09-03 07:35:10
·
answer #4
·
answered by liqsteal 2
·
0⤊
0⤋
that happen to me one time we just took needle nose pliers and got it out, depends on were the key broke
2006-09-03 07:35:43
·
answer #5
·
answered by nekas_bubbly 2
·
0⤊
0⤋
You could use picks but why just have some one replace the ignition switch.
2006-09-03 07:52:05
·
answer #6
·
answered by Bill T 1
·
0⤊
0⤋
The only way to do that is get a locksmith, my dear. It'll cost you some money, dear.
2006-09-03 07:40:34
·
answer #7
·
answered by FILO 6
·
0⤊
0⤋
replace the lock
2006-09-03 10:04:40
·
answer #8
·
answered by zak_z 3
·
0⤊
0⤋
You will have to have someone put a new switch in it.
2006-09-03 07:37:38
·
answer #9
·
answered by couchP56 6
·
0⤊
0⤋
buy a new car lol lol
2006-09-03 07:57:23
·
answer #10
·
answered by martinlostitch@btinternet.com 1
·
0⤊
0⤋