new starter motor but still no ignition
2006-09-02 03:32:35 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
New starter no ignition?
Does that mean you have no spark?
Does that mean the engine won't turn?
Does that mean the starter doesn't work?
Does that mean it turns over, but won't start?
Does that mean you don't get anything.
Could be a dead battery.
Could be a blown fuse.
Could be bad connection.
Could be a bad switch.
It could be a lot of things.
Could you be a little bit more specific???
2006-09-02 03:39:39 · answer #1 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋
stop buying fords dummy their should be a relay no more than 12 inches from the battery check it for corrosion and undo the ground sand the hole and return the ground that should do it
that's why i say stop buying fords because they have relays for everything its flippin ridiculous
2006-09-02 10:37:43 · answer #2 · answered by liqsteal 2 · 2⤊ 0⤋
have you got power down the solenoid wire when turning the ignition?
2006-09-03 05:07:09 · answer #3 · answered by chunky 5 · 0⤊ 0⤋
Your biggest problem here is that you're driving a Ford. I would suggest turning it in and going with a practicle AWD Subaru.
2006-09-02 10:34:28 · answer #4 · answered by apostate03 3 · 0⤊ 2⤋
haved you tried the leads?
or cap and rotor?
2006-09-02 10:38:36 · answer #5 · answered by Anonymous · 0⤊ 0⤋
check plugs, timing point and battery.
2006-09-02 10:40:13 · answer #6 · answered by Anonymous · 0⤊ 0⤋