This coating is ok when it is undamaged, but when some has scratched or worn off and some has not, there are areas of oxidation and areas of "like new" shine. I tried removing this on an old piece of brass and it came off rather easily with nail polish remiover, but I think this was quite worn and thin already. Now I have a piece of silverplate with this coating on most of it, I tried the nailpolish remover and it is not really working. Does anyone known of a simple way of removing this clearcoat on silver plate? (it is not a particularly valuable piece or I would go to a professional. Thanks in advance.
2006-09-01 08:44:46 · 5 answers · asked by Janni 2 in Home & Garden ➔ Cleaning & Laundry
nail polish remover is just acetone,,,apply a generous amount ( mineral spirits may be more gentle ) on a rag,,,,and rub hard,,,,the coating is most likely an enamel clear coat
2006-09-01 08:52:16 · answer #1 · answered by Dr. Biker 3 · 0⤊ 0⤋
If it affects the appearance at all, it will be hardly noticeable because it just doesn't work that way. Because the pigment particles are so small in varnishes and stains unlike those in paint, it isn't possible to make a dark piece appear lighter but you can make a light one darker. The only think that might happen is that the wood grain becomes even harder to see and the finish will look murky. Your best option to get the look you want is to strip the old varnish off with a chemical stripper, sand down to bare wood, and then reapply the lighter finish. There are companies that do this work for you and save you the effort, smell, and possible exposure to harsh solvents. A good one will also make your cabinets look like new, though you may be able to purchase new doors and drawer fronts for a cheaper price than having the old ones refinished. You can get a free estimate from a cabinet refacing shop to see what is involved. Choose one with references and that has been in business for a number of years, not one that is new to the industry.
2016-03-27 03:35:34 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Brass Protective Coating
2016-06-20 13:50:17 · answer #3 · answered by ardell 3 · 0⤊ 0⤋
You could try soaking it in vinegar. Tabasco sauce works too, but it is pricey.
Gasoline would probably work, but there are all kinds of safety issues with using gas as a solvent.
2006-09-04 12:41:39 · answer #4 · answered by eyesinthedarkness 4 · 0⤊ 0⤋
Lacquer thinner.
2006-09-04 15:28:52 · answer #5 · answered by Anonymous · 0⤊ 0⤋