2006-09-01 06:41:55 · 8 answers · asked by JR 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
turn signal flasher
2006-09-01 06:46:15 · answer #1 · answered by Al Bundy 4 · 0⤊ 0⤋
its the flasher. or a bulb. 4 ways work sometimes when the flashers dont. I would replace all bulbs first then check. if that doesnt work then replace the flasher.
i also have a 97 blazer
2006-09-03 16:23:42 · answer #2 · answered by Soldier62 2 · 0⤊ 0⤋
It could be the hazard switch, even though they are working, it is all part of the same circuit. Check with a GM dealer to see if there is a recall out on your vehicle to repair that problem. I don't think that there is, but it wouldn't hurt to check.
2006-09-04 20:54:02 · answer #3 · answered by Scooter 2 · 0⤊ 0⤋
Fuse, bad flasher, or electrical problem. Go with the fuse first, and replace the flasher, and that will more than likely fix your problem. Good Luck!
2006-09-03 22:20:33 · answer #4 · answered by Anonymous · 0⤊ 0⤋
look at the other side of the fuse box for the other flasher unit 4 way is heavy duty and turnsignals normal duty flasher.
2006-09-01 14:57:18 · answer #5 · answered by John Paul 7 · 0⤊ 0⤋
probably the turn signal switch
2006-09-04 13:54:05 · answer #6 · answered by ynda301 2 · 0⤊ 0⤋
Check your bulbs....are they two prong on the bottom or only one? You may simply have the wrong bulbs installed....this happened to me once.
2006-09-01 16:50:18 · answer #7 · answered by shortfrog 5 · 0⤊ 0⤋
,a bulb as two filaments may be bad bulbs , is it the two front ones only ?,check the bumper ground
2006-09-01 14:01:31 · answer #8 · answered by Bushit 4 · 0⤊ 0⤋