how much should it cost to install a sump pump in my basement?

Answer 1

It depends , do you want it installed in the Concrete floor, which means, breaking up concrete and digging out a hole for a Collector,and patching in the Concrete, then install the pump and wiring and plubing, a easy $600 - if the pump is for a Washer , it can set on the Floor self contained, still about $600 as that type cost more. In any case, depending on who does the work, $500 to $1000 tops.

Answer 2

A good sump pump can cost between $100-$200. A check valve usually costs about 10-15 bucks, and then you need the materials...

The piping price can vary depending on if you are going to go with copper or PVC and how long the pipe has to be.. I would suggest PVC for several reasons. (Conveinence, easiness, price, durability)

Good luck

Answer 3

That depends if you have an existing sump pump....Replace existing it will cost $100.
If you are trying to install a new system, with concrete cutting, trenching, PVC pipe, stone, fiber mesh, pipe for hole, sump pump, backfill, concrete, pipe to exterior....$3000 - $5000

Answer 4

that depends on the pump the bigger the pump the more pricey they get but i would say around 300 anyway

Answer 5

particular, particularly person-friendly to do. locate the backside factor the place the water flows too. Thats the place you ought to interrupt a hollow interior the concrete. Dig it out. set up pump. performed you may have it problematic under pressure in, or plug in variety... Its as much as you. particularly person-friendly to do! additionally, you ought to use a basic backyard hose to expel the water to the exterior or have a plumber or your self plumb suitable into the present drainage equipment (not code)