2006-08-31 06:03:39 · 3 answers · asked by Scott O 1 in Home & Garden ➔ Maintenance & Repairs
Would replace two 2' x 3' existing and rusted windows.
2006-08-31 06:16:19 · update #1
glass blocks can only be used in a module of 200mm ( 8 inches) including joints, so measure first to make sure the module works out for you first, before you get the blocks.. so if the size is too big or too small for the module, then you may as well get someone to build concrete bricks or blocks to the size of the module that fits best...and then get it plastered too...also you will need a flexible joint around the perimeter of 10 mm so that expansion is possible and sealed with silicone sealant...glass blocks look terrible if done incorrectly so get someone competent to do the job for you...best of luck!!!..prices will range from 150 dollars to 4 or 5 hundred , depending on how much work is involved
2006-08-31 11:02:02 · answer #1 · answered by lone wolf and pub 5 · 0⤊ 0⤋
Usually around $75.00 to $125.00. Depends on the size and if there is a vent in it. Check out those JB Dollar stretchers. They always have coupons and ads from different installers. My husband is a bricklayer so he gets asked about them all the time.
2006-08-31 06:09:02 · answer #2 · answered by Anonymous · 0⤊ 0⤋
not enough info, like is it replacing an existing, and how big, but I would say your looking at $500 min.
2006-08-31 06:10:47 · answer #3 · answered by daniel a 3 · 0⤊ 0⤋