The break lights are out on my car. The top rear window light still works. The fuses are still good. What other possibilities are there of why they aren't working? Blinkers and reverse light still works. Any input is greatly appreciated. Thank you so much!
2006-08-31 05:34:19 · 8 answers · asked by emmymn 3 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
good luck. be happy
2006-08-31 05:39:28 · answer #1 · answered by ladyofthehollow 7 · 0⤊ 1⤋
Why were the lights broken? (Did you mean "brake" lights?)
I had some lights that weren't working and it turned out I had the wrong bulbs. But you might check to see that there is still power at the socket and follow your connector and then lines if there isn't.
2006-08-31 05:41:56 · answer #2 · answered by Rabbit 7 · 0⤊ 0⤋
First re-check the light bulbs (both elements inside each bulb). If they are good then check the ground circuit.
2006-08-31 06:12:59 · answer #3 · answered by ? 4 · 0⤊ 0⤋
brake lights are triggered by a switch behind the pedal take a look (towards bulkhead) and see if there are any signs of sticking or failure
2006-08-31 20:25:34 · answer #4 · answered by zshark272000 1 · 0⤊ 0⤋
Stop lamp switch @ brake pedal is one.
Did you ck the bulbs?
Double filiment bulbs, directionals may work but brk lmps may not.
stop lmp switch GM Pt.#12450023
ACDELCO Pt.#D881A
2006-08-31 05:47:46 · answer #5 · answered by Dave B 3 · 0⤊ 0⤋
replace the turn signal switch ,your rear brakelight circuit feeds through it,but the center light does not.
2006-08-31 20:41:16 · answer #6 · answered by wrencher 1 · 0⤊ 0⤋
Multifunction switch, that is your directional switch, common problem, because both directionals go go thru switch but third light doesnt
2006-08-31 05:49:25 · answer #7 · answered by bestwrencher 4 · 0⤊ 0⤋
Most likely a fuse in you dash panel
2006-08-31 05:58:15 · answer #8 · answered by nbr660 6 · 0⤊ 1⤋