2006-08-30 20:29:36 · 10 answers · asked by Anonymous in Consumer Electronics ➔ Music & Music Players
I hate to say it, but it's probably time to get a new one, and sell the one you have AS-IS. It sounds like your laser is out of alignment and will be more costly to fix than it's worth unless you have an expensive CD player.
2006-08-30 20:40:55 · answer #1 · answered by Anonymous · 2⤊ 0⤋
if your cd player is front loading, one fault is the tray got misaligned. misaligned tray cant load the disc therefore not reading the cd. try pushing the outer tray cover to help it close properly and keep pushing until it 'loads up'.
another fault is 'slipping disc'. while cd loading, the disc has to spin with a standard rotation speed and not achieving it will mean not reading the disc and no disc error message. try aligning the tray first. if it doesn't do it, try roughing up the contacts that rotates the disc (meaning you have to open up the player).
if it still doesn't work, bring it to a repair shop or better buy a new one.
2006-08-30 20:48:52 · answer #2 · answered by digiman 2 · 0⤊ 0⤋
Chances are your eye that reads the cds are dirty. My Sony that I had in storage for a couple of years just started doing that. Manually open the cd player and clean the eye with rubbing alcohol and a q-tip. After it starts to read cds again, invest in a cd player cleaner. The kind that plays instructions and then tells you to skip to a certain track allowing you to brush oof your eye before it gets too dirty to read.
2006-09-03 11:02:22 · answer #3 · answered by youngblade 2 · 0⤊ 0⤋
My son has an o.e.m CD participant that sometimes does this. i stumbled on a restoration for his by ability of twist of fate. i became engaged on the automobile and needed to disconnect the battery. after i became complete with my artwork and reconnected the battery, the CD participant spit out the wedged disk. First, in the journey that your CD participant has any codes that would desire to be entered while the battery is disconnected, get them now. some production facility audio structures have a protection code which you will set. If the flexibility is removed from the audio gadget, this code might desire to be entered earlier the gadget will artwork. it fairly is in case the gadget is stolen. it will be ineffective to the thief with out the code. in the journey that your gadget makes use of a code like this, make certain you realize the code befoer disconnecting the flexibility or you audio gadget would be disabled once you reconnect the battery. the only thank you to restoration it would be an high priced holiday to the broker. Disconnect the unfavourable bring about the battery for sort of 10 minutes. with any luck, once you re-connect the battery, it is going to offer eject the disk.
2016-11-06 03:16:48 · answer #4 · answered by Anonymous · 0⤊ 0⤋
It could be that the lens that reads the CDs is dirty. Any good electrical shop will sell a CD lens cleaning kit. Let's know if it works.
2006-08-30 23:06:14 · answer #5 · answered by ciscowen 1 · 1⤊ 0⤋
that error of the CD it self or the CD player but to now that try anther CD if it not work that it is the CD player have to fix it or have an other one good lack
2006-08-30 20:38:34 · answer #6 · answered by siso_0 2 · 0⤊ 0⤋
alot of time home cdplayers may not play mp3s you may have to convert music to wav files first and alot of cd players wont play music cds if you dont close your session when burning the cd
2006-08-30 20:37:09 · answer #7 · answered by salute222000 4 · 0⤊ 0⤋
Insert the disc properly & it still doesn't play call the Computer installer he'll do the rest.
2006-08-30 20:36:48 · answer #8 · answered by vjkiran 3 · 0⤊ 0⤋
the eye burnt out, you need a new cd player.
2006-08-30 20:32:56 · answer #9 · answered by viper 3 · 0⤊ 0⤋
I would like to know the answer to that too....Mines do that sumtime
2006-08-30 20:58:13 · answer #10 · answered by msladykay2000 3 · 0⤊ 1⤋