I got HP 5302RSH w\MV540 monitor,the tower has power,nofeed to monitor,when unplugeditsays checkVGA line,what?

Question

I am a novice at this putter stuff can my VIDEO card be runuth over w\crap,that's why it won't read monitor?

Answer 1

Check the cable from the monitor to the video card...it might not be plugged in fully. Are you getting any beeps when you turn on your computer? If there is more than one, your video card might be bad.

Answer 2

it seems a technical problem so let me tell u some options that helps u:
u can do that unplug the monitor from ur case and se if there is dirt in it if so with a small towel u clean the dirt from or u can blow some air from ur mouth in the cable of the monitor after u unplug and put it again and then se what'll happen.
or u can check the card of ur video may be it moved while u work n ur pc or anything and it just ned to put it back to its place or u can unplug the video card and see if there is alot of dirt on and u can clean it with air u know a tool that spread air through devices that can make the whole dirt pused away and then put it carefully again in the place u got from and plug the cable of the monitor in and se what wil happen if it worked so good for ya if not that means ur video card is broken if it tries to open the whole information and can't open u ned to buy a new card and it is better to buy one that have 256 or mini 128 cos it works good and can always handle the hard working and make ur monitor have a clear view.hope that helps.